Skylake on Asus Z170-K - Cannot load Unibeast

[Kinutsk]

I did optimized defaults plus changed the following settings
Serial port - disabled
CSM - disabled
XHCI - enabled
Fastboot disabled
Secure boot - disabled
OS type - Other OS
USB legacy - disabled
CFG lock - disabled
VT-d disabled
Also only using the integrated graphics not usiang a graphics card. I get to the boot loader and it crashes. can you attach your efi so i can try that instead of the one i have?

 

[saadme]

i just used the standard UniBeast installer, so make that and see how it goes.

Your settings look the same asmine, except i have VT-D enabled.

If you haven't used UniBeast to make the USB try that and see if it works.

Oh, I also updated the BIOS on mine to the latest version so make sure you do that.

 

[Kinutsk]

I updated BIOS via Internet, so i have the latest version. I will try using UniBeast on another computer though it seems UniBeast was not detecting my USB since i updated to 10.11.5 on my other build hence why i was hoping you can share your EFI

 

[saadme]

Ok what port are you using the stick in? make sure its a USB 2 port

 

[saadme]

which file did you want from the efi drive?

 

[Kinutsk]

The whole EFI would be great thanks! just zip it and upload....

 

[Kinutsk]

Ok what port are you using the stick in? make sure its a USB 2 port

Just to be clear on the USB, I'm using the rear USB 2.0 port on the ASUS Z170-K. On my other build when making the USB, Unibeast seems to see the USB as an internal drive but OSX shows it as removable so Unibeast refuses to install to it, but i have used the createinstall media script without issues, very strange behaviour....

 

[saadme]

Ok I was using a USB 2 port that connect to the USB 2 motherboard header, maybe try that?

 

[saadme]

EFI.

 

[Kinutsk]

EFI.

Thanks a Million!!! I will try this when i get home later today after work