- Joined
- Jan 21, 2017
- Messages
- 15
- Motherboard
- Gigabyte Z790 UD AC
- CPU
- i7-13700K
- Graphics
- RX 6650 XT
- Mac
- Mobile Phone
I have a Lenovo ThinkStation D20 with 2x X5650 CPUs, 96GB RAM, a Quadro 2000 video card, and a 240GB HyperX Predator M.2 PCIe SSD drive.
Using the http://www.redmondpie.com/how-to-install-macos-sierra-hackintosh-on-pc-guide/ instructions as a guide, I was able to get Sierra installed to the SSD without any real issues. However, about 50% of the time while booting off the USB, the system would freeze during bootup.
After successfully installing Sierra to the SSD, I simply cannot boot the OS through from the SSD. 100% of the time, the system freezes at the exact same spot that it would freeze while booting from USB. I have tried to search for the previous lines in the log to try to get some help debugging with no success. I have tried all the typical boot flags with no success (nv_disable, PCIRootUID, npci, GraphicsEnabler, -x/f/v). Yet it continues to freeze at the exact same spot every time.
The boot sequence freezes after 12+ variants of this line:
I can't tell if it's freezing after this step, or before the next step. I've also dabbled a bit with trying to modify/add kexts, but I'm not sure what I'm doing.
Using the http://www.redmondpie.com/how-to-install-macos-sierra-hackintosh-on-pc-guide/ instructions as a guide, I was able to get Sierra installed to the SSD without any real issues. However, about 50% of the time while booting off the USB, the system would freeze during bootup.
After successfully installing Sierra to the SSD, I simply cannot boot the OS through from the SSD. 100% of the time, the system freezes at the exact same spot that it would freeze while booting from USB. I have tried to search for the previous lines in the log to try to get some help debugging with no success. I have tried all the typical boot flags with no success (nv_disable, PCIRootUID, npci, GraphicsEnabler, -x/f/v). Yet it continues to freeze at the exact same spot every time.
The boot sequence freezes after 12+ variants of this line:
Code:
AppleUSBHostResources@: AppleUSBHostResources::allocateDownstreamBusCurrentGated: assuming successful wakeUnits 500 sleepUnits 0
I can't tell if it's freezing after this step, or before the next step. I've also dabbled a bit with trying to modify/add kexts, but I'm not sure what I'm doing.