Shutdown causes reboot

[cloudyun]

I recently finished building and installing my first hackintosh but I am unable to shutdown. Instead it just restarts. I have tried FixShutdown and FixShutdown_0004.

Any help would be greatly appreciated.

 

[CaseySJ]

Try this:
https://www.tonymacx86.com/threads/...390-with-i7-9700k.266065/page-10#post-1868094

 

[cloudyun]

RC-Scripts-in-Target-Volume

Where do I get this?

 

[CaseySJ]

Where do I get this?

Hopefully this is more specific:
https://www.tonymacx86.com/threads/mojave-10-14-1-shutdown-problem-h370.266688/page-2#post-1870508

 

[cloudyun]

I just tried it and it does not work for me.

 

[CaseySJ]

The solution can vary from motherboard to motherboard. If you search the forum for keywords such as "fix shutdown" or "shutdown not working" and look for a solution from a person with a similar motherboard, it might work for you.

In most cases, shutdown problems are resolved with a combination of:

• EmuVariableUefi-64 (which emulates NVRAM)
• One of the memory fix drivers (AptioMemoryFix, OsxAptioFixDrv, OsxAptioFix2Drv, OsxAptioFix3Drv, OsxAptioFix2Drv-free2000). Only install one of these at a time and test.
• Enabling the slide=0 checkbox in Clover Configurator or when pressing Space Bar after booting to the Clover Boot Screen. For some, slide=0 fails. For others it works.

So the solution for each person typically is some permutation of the above 3. Some people also find that disabling "ErP" in BIOS solves the problem.

 

[Mrviking]

@CaseySJ i installed emuvariableuefi. It worked, but now I get a 'stop/no access' sign when I try to boot macos.

Did slide=0. Seems to do the trick!