- Joined
- Apr 12, 2018
- Messages
- 6
- Motherboard
- Toshiba Satellite C650-06E
- CPU
- Intel Core i3-2350M
- Graphics
- Intel HD Graphics 3000
- Mac
- Classic Mac
- Mobile Phone
So, my laptop (A Toshiba Satellite L500-00F) gets stuck at the prohibitory sign when trying to boot from my high sierra USB.
Three different problems have occurred:
1. When my 8GB RAM stick is on the bottom RAM slot, It will get stuck at End RandomSeed and a wall of + and then reboot
2. When my 8GB RAM stick is on the Top RAM slot, it will get stuck at Still Waiting for root device and it will display the PROHIBITORY sign
3. Regardless of which RAM slot my 8GB RAM stick is in, when using a Skylake or Westmere FakeCPUID, It will get stuck at End RandomSeed and a wall of + and then reboot
My Specs are as follows:
BIOS Type: Legacy (NON-UEFI)
Laptop: Toshiba Satellite L500-00F
CPU: Intel Core i3-330M (1st gen Westmere)
GPU: 1st gen Intel HD Graphics
RAM: 8GB of Kingston-made 1066 DDR3 RAM (1 Module)
SSD: 64GB SanDisk SSD
USB Flash Drive: 16GB Lexar USB Flash Drive
WiFi Card: Broadcom BCM94322HM8L DW 1510 (Supported by macOS OOB)
For my IGPU:
I'm Following This Guide on InsanelyMac:
https://www.insanelymac.com/forum/topic/286092-guide-1st-generation-intel-hd-graphics-qeci/
And I'm Using These kexts
https://www.insanelymac.com/forum/files/file/208-1st-gen-intel-hd-graphics-kexts/
Please Help me as this is my first Laptop Hackintosh Project.
Attached is my config.plist
EDIT: i get to Attempting System Restart MACH Reboot when using the SandyBridge FakeCPUID
Three different problems have occurred:
1. When my 8GB RAM stick is on the bottom RAM slot, It will get stuck at End RandomSeed and a wall of + and then reboot
2. When my 8GB RAM stick is on the Top RAM slot, it will get stuck at Still Waiting for root device and it will display the PROHIBITORY sign
3. Regardless of which RAM slot my 8GB RAM stick is in, when using a Skylake or Westmere FakeCPUID, It will get stuck at End RandomSeed and a wall of + and then reboot
My Specs are as follows:
BIOS Type: Legacy (NON-UEFI)
Laptop: Toshiba Satellite L500-00F
CPU: Intel Core i3-330M (1st gen Westmere)
GPU: 1st gen Intel HD Graphics
RAM: 8GB of Kingston-made 1066 DDR3 RAM (1 Module)
SSD: 64GB SanDisk SSD
USB Flash Drive: 16GB Lexar USB Flash Drive
WiFi Card: Broadcom BCM94322HM8L DW 1510 (Supported by macOS OOB)
For my IGPU:
I'm Following This Guide on InsanelyMac:
https://www.insanelymac.com/forum/topic/286092-guide-1st-generation-intel-hd-graphics-qeci/
And I'm Using These kexts
https://www.insanelymac.com/forum/files/file/208-1st-gen-intel-hd-graphics-kexts/
Please Help me as this is my first Laptop Hackintosh Project.
Attached is my config.plist
EDIT: i get to Attempting System Restart MACH Reboot when using the SandyBridge FakeCPUID
Attachments
Last edited: