- Joined
- Jun 26, 2011
- Messages
- 17
- Motherboard
- Gigabyte Z490 Vision D
- CPU
- i7-10700K
- Graphics
- HD 630
- Mac
- Mobile Phone
Hi all,
First off, let me say a big thanks to all that have contributed to this wonderful site!
First time poster, long time lurker
My system is 99% there, the only problem I seem to have is that I get a black screen if using the hdmi port of my graphics card when I boot into 10.6.8. (Works fine on the Win 7 side). I can see everything if i boot with -v up till the point just before the desktop and then it all goes black.
If I have both the HDMI and the DVI ports connected I get the Snow leopard background on the DVI port (must be showing as a second display) and a black screen on the HDMI side.
Im using the correct DSDT for my motherboard and the graphics card is showing correctly in the System profiler.
Any help / ideas appreciated
System spec: core i7 2600K @ 4.2Ghz, 8GB Corsair XMS3 Ram @ 1600Mhz,
Gigabyte p67a-ud3-b3 Version 1.1 BIOS F4, Sapphire HD 6870 1GB
First off, let me say a big thanks to all that have contributed to this wonderful site!
First time poster, long time lurker
My system is 99% there, the only problem I seem to have is that I get a black screen if using the hdmi port of my graphics card when I boot into 10.6.8. (Works fine on the Win 7 side). I can see everything if i boot with -v up till the point just before the desktop and then it all goes black.
If I have both the HDMI and the DVI ports connected I get the Snow leopard background on the DVI port (must be showing as a second display) and a black screen on the HDMI side.
Im using the correct DSDT for my motherboard and the graphics card is showing correctly in the System profiler.
Any help / ideas appreciated
System spec: core i7 2600K @ 4.2Ghz, 8GB Corsair XMS3 Ram @ 1600Mhz,
Gigabyte p67a-ud3-b3 Version 1.1 BIOS F4, Sapphire HD 6870 1GB