Contribute
Register

Sandy Bridge Benchmark/Performance Thread

Status
Not open for further replies.
Re: SandyBridge Benchmark/Performance Thread

michote said:
Yoga: How are you running kernel 10.7.3 vanilla with the multiplier at 44? Mine resets if I don't have it under 32 and only lets me go turbo to 44? and are you getting audio out on your Displayport Apple display?

I think the Asus boards don't have the 32 multiplier limit.
 
Re: SandyBridge Benchmark/Performance Thread

michote said:
Yoga: How are you running kernel 10.7.3 vanilla with the multiplier at 44? Mine resets if I don't have it under 32 and only lets me go turbo to 44? and are you getting audio out on your Displayport Apple display?

No audio through DisplayPort, but that's a non-issue personally.

I'm not sure why I can overclock, and some can't. My guess is that I installed Chameleon RC5 r750 and then the ATI package (merge of kabyl and AnVAL branches).

One thing to note - I use NullCPUPowerManagement, and disable all C-States in BIOS. Give that a pop.
 
Re: SandyBridge Benchmark/Performance Thread

Scores

Cinebench:
OpenGL 50.99fps
CPU 8.40pts

Geekbench:
14486

Xbench:
509

System

- Mobo (BIOS): Gigabyte GA-P67A-UD5-B3 (F2)
- CPU: i7 2600K @ 4.4Ghz
- RAM: 12GB Corsair Vengeance 1600Mhz 9-9-9-24-2T
- GFX: XFX 5770 1GB
- HDD: 2x WD Caviar Black 6gbps 1TB in RAID0 (Stripped)
- Display: Dell Ultrasharp 24" (DVI Port)

System Info & Drivers

- DSDT: Yes
- OS X: 10.6.7
- Kernel: 10.7.3
- Architecture: 64 bit
- Bootloader: Chameleon r750
- Branch: Andy (based off kabyl & AnVAL)
- GFX: 10.6.6 Vanilla ATI

BIOS Settings

- Multiplier: 44
- Vcore: auto
- Vcore Mode: auto
- Load-Line Calibration: auto
- Turbo: Disabled
- EIST: Disabled
- Speedstep: Disabled
 
Re: SandyBridge Benchmark/Performance Thread

Xbench: 597.49

System
- Mobo (BIOS): Asus P8P67 Deluxe B3 Revision (1502)
- CPU: i7 2600K @ 5.0Ghz
- RAM: 4GB Mushkin 1600Mhz 6-8-6-24
- GFX: GTX 460
- HDD: Crucial C300 256GB

System Info & Drivers
- OS X: 10.6.7
- Kernel: 10.7.3
- Architecture: 64 bit
- Bootloader: Chameleon r750
- Branch: Andy (based off kabyl & AnVAL)

BIOS Settings
- Multiplier: 50
- Vcore: 1.42
- VCCSA: 1.1
- VCCIO: 1.15
- Load-Line Calibration: U. High
- VRM Frequency: 350
- Phase Control: Extreme
- Duty Control: Extreme
- Turbo: Enabled
- EIST: Disabled
- Spread Spectrum: Auto
- Internal PLL: Enabled
- CPU PLL: Auto
 

Attachments

  • Screen shot 2011-04-02 at 10.33.09 PM.png
    Screen shot 2011-04-02 at 10.33.09 PM.png
    127 KB · Views: 342
Re: SandyBridge Benchmark/Performance Thread

Geek, Nova, Cine, and XBench (Only 3 are uploaded cause you can only have 3 attachments per post.

System
- Mobo (BIOS): Gigabyte GA-P67A-UD3-B3 (F2)
- CPU: i7 2500K @ 4.2Ghz
- RAM: 16GB G.Skill DDR3 1600
- GFX: ATI 5870
- HDD: Crucial C300 64GB

System Info & Drivers
- OS X: 10.6.7
- Kernel: 10.7.3
- Architecture: 64 bit
- Bootloader: Chameleon r750
- Branch: Andy (based off kabyl & AnVAL)

BIOS Settings
- Multiplier: 32 - Turbo 42
- Vcore: Auto
- VCCSA: Auto
- VCCIO: Auto
- Load-Line Calibration: Enabled
- VRM Frequency: N/A
- Phase Control: N/A
- Duty Control: N/A
- Turbo: Enabled
- EIST: Disabled
- Spread Spectrum: Auto
- Internal PLL: Enabled
- CPU PLL: Auto

Geek - 11791
 

Attachments

  • Screen shot 2011-04-04 at 8.40.35 AM.png
    Screen shot 2011-04-04 at 8.40.35 AM.png
    165.5 KB · Views: 337
  • Screen shot 2011-04-04 at 8.44.44 AM.png
    Screen shot 2011-04-04 at 8.44.44 AM.png
    60.9 KB · Views: 320
  • Screen shot 2011-04-04 at 8.46.28 AM.png
    Screen shot 2011-04-04 at 8.46.28 AM.png
    185.3 KB · Views: 325
Re: SandyBridge Benchmark/Performance Thread

Gordo74 said:
Geek, Nova, Cine, and XBench (Only 3 are uploaded cause you can only have 3 attachments per post.

System
- Mobo (BIOS): Gigabyte GA-P67A-UD3-B3 (F2)
- CPU: i7 2500K @ 4.2Ghz
- RAM: 16GB G.Skill DDR3 1600
- GFX: ATI 5870
- HDD: Crucial C300 64GB

System Info & Drivers
- OS X: 10.6.7
- Kernel: 10.7.3
- Architecture: 64 bit
- Bootloader: Chameleon r750
- Branch: Andy (based off kabyl & AnVAL)

BIOS Settings
- Multiplier: 32 - Turbo 42
- Vcore: Auto
- VCCSA: Auto
- VCCIO: Auto
- Load-Line Calibration: Enabled
- VRM Frequency: N/A
- Phase Control: N/A
- Duty Control: N/A
- Turbo: Enabled
- EIST: Disabled
- Spread Spectrum: Auto
- Internal PLL: Enabled
- CPU PLL: Auto

Geek - 11791

Glad to see you got to overclocking. Would have been a niggle being stuck under stock speeds, especially with these chips.
 
Re: SandyBridge Benchmark/Performance Thread

Gordo74 said:
Geek, Nova, Cine, and XBench (Only 3 are uploaded cause you can only have 3 attachments per post.

System
- Mobo (BIOS): Gigabyte GA-P67A-UD3-B3 (F2)
- CPU: i7 2500K @ 4.2Ghz
- RAM: 16GB G.Skill DDR3 1600
- GFX: ATI 5870
- HDD: Crucial C300 64GB

System Info & Drivers
- OS X: 10.6.7
- Kernel: 10.7.3
- Architecture: 64 bit
- Bootloader: Chameleon r750
- Branch: Andy (based off kabyl & AnVAL)

BIOS Settings
- Multiplier: 32 - Turbo 42
- Vcore: Auto
- VCCSA: Auto
- VCCIO: Auto
- Load-Line Calibration: Enabled
- VRM Frequency: N/A
- Phase Control: N/A
- Duty Control: N/A
- Turbo: Enabled
- EIST: Disabled
- Spread Spectrum: Auto
- Internal PLL: Enabled
- CPU PLL: Auto

Geek - 11791

oh god! nice fps in ATI, link card version?
 
Status
Not open for further replies.
Back
Top