- Joined
- Dec 7, 2011
- Messages
- 12
- Motherboard
- UT4-Z68
- CPU
- i7
- Graphics
- nvidia gtx 970
- Mac
- Classic Mac
- Mobile Phone
Hi everyone.
When I started the installation, I have written flags for boot from USB:
GraphicsEnabler=Yes PCIRootUID=1 npci=0x2000 -v -x
"I try with a lot of flags and many distributions of this flags, I tried npci=0x3000 to"
So we start with the installation process, after the restart I written the same flags again to continue the installation. I did not put interest on this at this point but when I finish the installation, I could not access without the Usb, and only in Safe Mood with this flags, so..... that's the problem
I Installed the nvidia web drivers on safe mode.
I tried installing my mobo DSDT and nothing.
Here my configuration.
SO. Yosemite 10.10.2
MOBO: GA-Z68XP-UD4
Graphics: Nvidia Gtx 570
Ram: 16 gigas
Procesor 3.4 ghz i7
Another thing to say: The system only reads 2.51 Ghz from my processor "What? Yes my friend only 2.51"
Here my org.chameleon.Boot.plist
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>EHCIhard</key>
<string>Yes</string>
<key>EthernetBuiltIn</key>
<string>Yes</string>
<key>GraphicsEnabler</key>
<string>Yes</string>
<key>IGPEnabler</key>
<string>Yes</string>
<key>Kernel Flags</key>
<string>nvda_drv=1 PCIRootUID=1 kext-dev-mode=1 -v</string>
<key>Legacy Logo</key>
<string>Yes</string>
<key>Timeout</key>
<string>2</string>
<key>GenerateCStates</key>
<string>Yes</string>
<key>GeneratePStates</key>
<string>Yes</string>
<key>UseKernelCache</key>
<string>Yes</string>
</dict>
</plist>
In the attachment image you can see that I see when I start the computer without USB and -x flag
I don't know what to do :'( I need to cry in my mom's arms
When I started the installation, I have written flags for boot from USB:
GraphicsEnabler=Yes PCIRootUID=1 npci=0x2000 -v -x
"I try with a lot of flags and many distributions of this flags, I tried npci=0x3000 to"
So we start with the installation process, after the restart I written the same flags again to continue the installation. I did not put interest on this at this point but when I finish the installation, I could not access without the Usb, and only in Safe Mood with this flags, so..... that's the problem
I Installed the nvidia web drivers on safe mode.
I tried installing my mobo DSDT and nothing.
Here my configuration.
SO. Yosemite 10.10.2
MOBO: GA-Z68XP-UD4
Graphics: Nvidia Gtx 570
Ram: 16 gigas
Procesor 3.4 ghz i7
Another thing to say: The system only reads 2.51 Ghz from my processor "What? Yes my friend only 2.51"
Here my org.chameleon.Boot.plist
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>EHCIhard</key>
<string>Yes</string>
<key>EthernetBuiltIn</key>
<string>Yes</string>
<key>GraphicsEnabler</key>
<string>Yes</string>
<key>IGPEnabler</key>
<string>Yes</string>
<key>Kernel Flags</key>
<string>nvda_drv=1 PCIRootUID=1 kext-dev-mode=1 -v</string>
<key>Legacy Logo</key>
<string>Yes</string>
<key>Timeout</key>
<string>2</string>
<key>GenerateCStates</key>
<string>Yes</string>
<key>GeneratePStates</key>
<string>Yes</string>
<key>UseKernelCache</key>
<string>Yes</string>
</dict>
</plist>
In the attachment image you can see that I see when I start the computer without USB and -x flag
I don't know what to do :'( I need to cry in my mom's arms