- Joined
- Apr 25, 2011
- Messages
- 30
- Motherboard
- GA-Z77X-UP5 TH
- CPU
- i7-3770K
- Graphics
- RX 580
- Mac
- Mobile Phone
Hi everyone.
I recently updated my Hackintosh to Mojave; it's older hardware, but always worked flawlessly (or just about). Unfortunately I found out after the update that my GTX660ti was not fully compatible, so I purchased a nice Sapphire RX 580.
However, it has a very odd glitch: every time I reboot, it will work perfectly all the way up to the Mac OS login screen. There it goes bananas and shows varying degrees - usually a lot - of static, coloured noise to be exact. To be clear, the BIOS, Clover, and boot sequence all display as expected. This only starts at the login screen and beyond. The stranger thing is that if I unplug, and re-plug the cable from the back of the card, it self-corrects and works flawlessly in Mac OS. It displays properly and it shows up correctly in hardware profiles. Then I reboot, and we go at it again... I just don't get it!
I've attached my Clover EFI if someone cares to help out; it's a mess, I know, but I have tried to boot from a fresh, vanilla config.plist file yet got the same result.
I've double checked the card and hardware under Windows and I'm satisfied neither the card, cables or monitor are to blame.
Any, and I mean ANY help would be great. I've followed every guide I could find, and I have like 20 tabs open with various tweaks and whatnot and still can't figure it out. I know I can live with it, but it's just soooooo annoying!
GA-Z77x-UP5-TH, i7 3770k, Sapphire RX 580 8 Gb.
Thanks in advance to any brave soul who wants to help me!
I recently updated my Hackintosh to Mojave; it's older hardware, but always worked flawlessly (or just about). Unfortunately I found out after the update that my GTX660ti was not fully compatible, so I purchased a nice Sapphire RX 580.
However, it has a very odd glitch: every time I reboot, it will work perfectly all the way up to the Mac OS login screen. There it goes bananas and shows varying degrees - usually a lot - of static, coloured noise to be exact. To be clear, the BIOS, Clover, and boot sequence all display as expected. This only starts at the login screen and beyond. The stranger thing is that if I unplug, and re-plug the cable from the back of the card, it self-corrects and works flawlessly in Mac OS. It displays properly and it shows up correctly in hardware profiles. Then I reboot, and we go at it again... I just don't get it!
I've attached my Clover EFI if someone cares to help out; it's a mess, I know, but I have tried to boot from a fresh, vanilla config.plist file yet got the same result.
I've double checked the card and hardware under Windows and I'm satisfied neither the card, cables or monitor are to blame.
Any, and I mean ANY help would be great. I've followed every guide I could find, and I have like 20 tabs open with various tweaks and whatnot and still can't figure it out. I know I can live with it, but it's just soooooo annoying!
GA-Z77x-UP5-TH, i7 3770k, Sapphire RX 580 8 Gb.
Thanks in advance to any brave soul who wants to help me!