Running Multibeast after Installs

[plexguy]

Hi,

First time after USB Unibeast install, it asks that you boot with the USB but boot into your HD (Lion) partition and run Multibeast for the first time. All works.

For future, each time we run Multibeast, do you have to Boot from USB, choose your HD and then run Multibeast like the first time? or you run Multibeast right from your Desktop booted from your HD and not boot via the USB.

Thanks
PG

 

[jester969]

If your system works as should all you have to do is run MB off the desktop in the future.

No need to access it off a USB stick, you can if you want to use it as stick solely for all your hackintosh files but MB as itself on the desktop you can run it off fine without problems.

 

[plexguy]

Cool.. thanks jester969.. infact I used your build guide to get my system going so far. Thank You. GPU still needs config. EVGA 560Ti. gotta find a guide for that.

Last time I ran MB from the desktop, it ran and when "registering components" it failed with Installation Failed message. Thought I ask if I was doing something wrong

Thanks

 

[jester969]

Cool.. thanks jester969.. infact I used your build guide to get my system going so far. Thank You. GPU still needs config. EVGA 560Ti. gotta find a guide for that.

Last time I ran MB from the desktop, it ran and when "registering components" it failed with Installation Failed message. Thought I ask if I was doing something wrong

Thanks

Try MB again if it failed.

560Ti
http://www.tonymacx86.com/viewtopic.php?f=15&t=35148

5xx gfx cards
http://www.tonymacx86.com/viewtopic.php?f=15&t=28975