Contribute
Register

Restart after wake from sleep

Status
Not open for further replies.
masterspaz

masterspaz

Joined
Dec 4, 2012
Messages
5
Motherboard
HP Probook 4530s (Clover)
CPU
2.1 GHz Intel i3, intel 6 series
Graphics
Intel HD 3000 1366 x 768
Mac
  1. 0
Classic Mac
  1. 0
Mobile Phone
  1. 0
Hi guys,
Just this week, my 4430s started having problems with sleep. It used to be perfect.
Now everytime I wake it, it almost immediately reboots. Here's the report generated after it reboots:

Code: 
Thu May  7 19:59:05 2015


*** Panic Report ***
panic(cpu 0 caller 0xffffff800041e80a): Kernel trap at 0xffffff80008633a7, type 13=general protection, registers:
CR0: 0x000000008001003b, CR2: 0x0000000109384f68, CR3: 0x0000000002c81000, CR4: 0x00000000000626e0
RAX: 0xffff000000a0dcc0, RBX: 0x0000000000000047, RCX: 0x0000000001500000, RDX: 0xffffff8016b38ca0
RSP: 0xffffff8177c33d90, RBP: 0xffffff8177c33db0, RSI: 0xffffff8000b103f0, RDI: 0xffffff8016d6f000
R8:  0x0000000000004282, R9:  0xffffff8003083268, R10: 0xffffff8003084e10, R11: 0x0000001fb888380d
R12: 0x0000000000000470, R13: 0xffffff80282c1540, R14: 0xffffff8000b103f0, R15: 0xffffff8016d86180
RFL: 0x0000000000010246, RIP: 0xffffff80008633a7, CS:  0x0000000000000008, SS:  0x0000000000000010
Fault CR2: 0x0000000109384f68, Error code: 0x0000000000000000, Fault CPU: 0x0


Backtrace (CPU 0), Frame : Return Address
0xffffff814f44dc70 : 0xffffff800033a811 
0xfffff

Any help would be greatly appreciated!
 
masterspaz said:
Hi guys,
Just this week, my 4430s started having problems with sleep. It used to be perfect.
Now everytime I wake it, it almost immediately reboots. Here's the report generated after it reboots:

Code: 
Thu May  7 19:59:05 2015


*** Panic Report ***
panic(cpu 0 caller 0xffffff800041e80a): Kernel trap at 0xffffff80008633a7, type 13=general protection, registers:
CR0: 0x000000008001003b, CR2: 0x0000000109384f68, CR3: 0x0000000002c81000, CR4: 0x00000000000626e0
RAX: 0xffff000000a0dcc0, RBX: 0x0000000000000047, RCX: 0x0000000001500000, RDX: 0xffffff8016b38ca0
RSP: 0xffffff8177c33d90, RBP: 0xffffff8177c33db0, RSI: 0xffffff8000b103f0, RDI: 0xffffff8016d6f000
R8:  0x0000000000004282, R9:  0xffffff8003083268, R10: 0xffffff8003084e10, R11: 0x0000001fb888380d
R12: 0x0000000000000470, R13: 0xffffff80282c1540, R14: 0xffffff8000b103f0, R15: 0xffffff8016d86180
RFL: 0x0000000000010246, RIP: 0xffffff80008633a7, CS:  0x0000000000000008, SS:  0x0000000000000010
Fault CR2: 0x0000000109384f68, Error code: 0x0000000000000000, Fault CPU: 0x0


Backtrace (CPU 0), Frame : Return Address
0xffffff814f44dc70 : 0xffffff800033a811 
0xfffff

Any help would be greatly appreciated!
Click to expand...

The panic report is incomplete. Post the entire panic report as an attachment.
 
Code: 
Fri May  8 01:53:43 2015


*** Panic Report ***
panic(cpu 0 caller 0xffffff800041e80a): Kernel trap at 0xffffff80008bb592, type 13=general protection, registers:
CR0: 0x000000008001003b, CR2: 0x00000001013fe000, CR3: 0x0000000002c81000, CR4: 0x00000000000626e0
RAX: 0xffff000000a0dcc0, RBX: 0xffffff8016d91000, RCX: 0xffffff8000b10468, RDX: 0xffffff8016c0de00
RSP: 0xffffff8177b2bb80, RBP: 0xffffff8177b2bba0, RSI: 0xffffff8016c0de00, RDI: 0xffffff8016d91000
R8:  0x0000000000000007, R9:  0xffffff8019a0e800, R10: 0x0000000000000006, R11: 0x0000000000000007
R12: 0xffffff8016d91000, R13: 0xffffff801e936300, R14: 0x0000000000000000, R15: 0xffffff8016c0de00
RFL: 0x0000000000010286, RIP: 0xffffff80008bb592, CS:  0x0000000000000008, SS:  0x0000000000000010
Fault CR2: 0x00000001013fe000, Error code: 0x0000000000000000, Fault CPU: 0x0


Backtrace (CPU 0), Frame : Return Address
0xffffff814f46fc70 : 0xffffff800033a811 
0xffffff814f46fcf0 : 0xffffff800041e80a 
0xffffff814f46feb0 : 0xffffff800043a443 
0xffffff814f46fed0 : 0xffffff80008bb592 
0xffffff8177b2bba0 : 0xffffff80008b4728 
0xffffff8177b2bbd0 : 0xffffff800087809c 
0xffffff8177b2bc00 : 0xffffff80008d0330 
0xffffff8177b2bc40 : 0xffffff80008b0010 
0xffffff8177b2bc80 : 0xffffff80008afe51 
0xffffff8177b2bcc0 : 0xffffff80008afcd3 
0xffffff8177b2bd00 : 0xffffff7f80b83029 
0xffffff8177b2bd30 : 0xffffff7f80b83a43 
0xffffff8177b2bdd0 : 0xffffff7f812e4208 
0xffffff8177b2be00 : 0xffffff7f812e3868 
0xffffff8177b2be40 : 0xffffff7f812e34e9 
0xffffff8177b2be70 : 0xffffff80008b57ed 
0xffffff8177b2beb0 : 0xffffff80008b530f 
0xffffff8177b2bf30 : 0xffffff80008b01f3 
0xffffff8177b2bf70 : 0xffffff80008b5f83 
0xffffff8177b2bfb0 : 0xffffff80004192c7 
      Kernel Extensions in backtrace:
         com.apple.iokit.IOUSBFamily(705.4.14)[E15E9DC8-410F-3612-8371-E5FECD939E0D]@0xffffff7f80b6b000->0xffffff7f80bdbfff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff7f80b24000
         com.apple.driver.AppleUSBComposite(705.4.9)[8E052C83-2E50-3632-AC11-0524DFAF2449]@0xffffff7f812e2000->0xffffff7f812ebfff
            dependency: com.apple.iokit.IOUSBFamily(705.4.14)[E15E9DC8-410F-3612-8371-E5FECD939E0D]@0xffffff7f80b6b000


BSD process name corresponding to current thread: kernel_task
Boot args: kext-dev-mode=1 dart=0 slide=0 


Mac OS version:
14B25


Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
__HIB  text base: 0xffffff8000100000
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)


System uptime in nanoseconds: 215613774543
last loaded kext at 8038942460




Unable to gather system configuration information.Model: MacBookPro8,1, BootROM MBP81.0047.B0E, 2 processors, Intel Core i3, 2.10 GHz, 12 GB, SMC 1.68f99
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
Memory Module: BANK0/DIMM0, 4 GB, DDR3, 1333 MHz, Micron, 16JSF51264HZ-1G4D1
Memory Module: BANK1/DIMM0, 8 GB, DDR3, 1333 MHz, Micron, 16KTF1G64HZ-1G6N1
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x1461), Atheros 9285: 4.0.74.0-P2P
Bluetooth: Version 4.3.1f2 15015, 3 services, 19 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: TOSHIBA MK3261GSYN, 320.07 GB
USB Device: Hub
USB Device: HP HD Webcam [Fixed]
USB Device: Bluetooth USB Host Controller
USB Device: Hub
USB Device: Vendor-Specific Device
Thunderbolt Bus:
 
masterspaz said:
Code: 
Fri May  8 01:53:43 2015


*** Panic Report ***
panic(cpu 0 caller 0xffffff800041e80a): Kernel trap at 0xffffff80008bb592, type 13=general protection, registers:
CR0: 0x000000008001003b, CR2: 0x00000001013fe000, CR3: 0x0000000002c81000, CR4: 0x00000000000626e0
RAX: 0xffff000000a0dcc0, RBX: 0xffffff8016d91000, RCX: 0xffffff8000b10468, RDX: 0xffffff8016c0de00
RSP: 0xffffff8177b2bb80, RBP: 0xffffff8177b2bba0, RSI: 0xffffff8016c0de00, RDI: 0xffffff8016d91000
R8:  0x0000000000000007, R9:  0xffffff8019a0e800, R10: 0x0000000000000006, R11: 0x0000000000000007
R12: 0xffffff8016d91000, R13: 0xffffff801e936300, R14: 0x0000000000000000, R15: 0xffffff8016c0de00
RFL: 0x0000000000010286, RIP: 0xffffff80008bb592, CS:  0x0000000000000008, SS:  0x0000000000000010
Fault CR2: 0x00000001013fe000, Error code: 0x0000000000000000, Fault CPU: 0x0


Backtrace (CPU 0), Frame : Return Address
0xffffff814f46fc70 : 0xffffff800033a811 
0xffffff814f46fcf0 : 0xffffff800041e80a 
0xffffff814f46feb0 : 0xffffff800043a443 
0xffffff814f46fed0 : 0xffffff80008bb592 
0xffffff8177b2bba0 : 0xffffff80008b4728 
0xffffff8177b2bbd0 : 0xffffff800087809c 
0xffffff8177b2bc00 : 0xffffff80008d0330 
0xffffff8177b2bc40 : 0xffffff80008b0010 
0xffffff8177b2bc80 : 0xffffff80008afe51 
0xffffff8177b2bcc0 : 0xffffff80008afcd3 
0xffffff8177b2bd00 : 0xffffff7f80b83029 
0xffffff8177b2bd30 : 0xffffff7f80b83a43 
0xffffff8177b2bdd0 : 0xffffff7f812e4208 
0xffffff8177b2be00 : 0xffffff7f812e3868 
0xffffff8177b2be40 : 0xffffff7f812e34e9 
0xffffff8177b2be70 : 0xffffff80008b57ed 
0xffffff8177b2beb0 : 0xffffff80008b530f 
0xffffff8177b2bf30 : 0xffffff80008b01f3 
0xffffff8177b2bf70 : 0xffffff80008b5f83 
0xffffff8177b2bfb0 : 0xffffff80004192c7 
      Kernel Extensions in backtrace:
         com.apple.iokit.IOUSBFamily(705.4.14)[E15E9DC8-410F-3612-8371-E5FECD939E0D]@0xffffff7f80b6b000->0xffffff7f80bdbfff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff7f80b24000
         com.apple.driver.AppleUSBComposite(705.4.9)[8E052C83-2E50-3632-AC11-0524DFAF2449]@0xffffff7f812e2000->0xffffff7f812ebfff
            dependency: com.apple.iokit.IOUSBFamily(705.4.14)[E15E9DC8-410F-3612-8371-E5FECD939E0D]@0xffffff7f80b6b000


BSD process name corresponding to current thread: kernel_task
Boot args: kext-dev-mode=1 dart=0 slide=0 


Mac OS version:
14B25


Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
__HIB  text base: 0xffffff8000100000
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)


System uptime in nanoseconds: 215613774543
last loaded kext at 8038942460




Unable to gather system configuration information.Model: MacBookPro8,1, BootROM MBP81.0047.B0E, 2 processors, Intel Core i3, 2.10 GHz, 12 GB, SMC 1.68f99
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 512 MB
Memory Module: BANK0/DIMM0, 4 GB, DDR3, 1333 MHz, Micron, 16JSF51264HZ-1G4D1
Memory Module: BANK1/DIMM0, 8 GB, DDR3, 1333 MHz, Micron, 16KTF1G64HZ-1G6N1
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x1461), Atheros 9285: 4.0.74.0-P2P
Bluetooth: Version 4.3.1f2 15015, 3 services, 19 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: TOSHIBA MK3261GSYN, 320.07 GB
USB Device: Hub
USB Device: HP HD Webcam [Fixed]
USB Device: Bluetooth USB Host Controller
USB Device: Hub
USB Device: Vendor-Specific Device
Thunderbolt Bus:
Click to expand...

Panic report is still incomplete. There is usually a list of kexts loaded at the end...

But problems on wake from sleep are likely related to the kext you have installed for bluetooth firmware upload.

Make sure you have only one of these (depending on hardware):

BrcmPatchRAM.kext (Broadcom BT): https://github.com/RehabMan/OS-X-BrcmPatchRAM
IOath3kfrmwr.kext (Atheros AR3011): https://github.com/RehabMan/OS-X-Atheros-3k-Firmware
 
RehabMan said:
Panic report is still incomplete. There is usually a list of kexts loaded at the end...

But problems on wake from sleep are likely related to the kext you have installed for bluetooth firmware upload.

Make sure you have only one of these (depending on hardware):

BrcmPatchRAM.kext (Broadcom BT): https://github.com/RehabMan/OS-X-BrcmPatchRAM
IOath3kfrmwr.kext (Atheros AR3011): https://github.com/RehabMan/OS-X-Atheros-3k-Firmware
Click to expand...

This is great info. I'm having the same issue. How do I know which one of the above kext's to use for my bluetooth?
 
Build 1
GA-Z87MX-D3H |  i5 4670K |  GeForce GTX 650
turrisi2 said:
This is great info. I'm having the same issue. How do I know which one of the above kext's to use for my bluetooth?
Click to expand...

Which bluetooth device is installed in the laptop?
What about hardware details on the laptop?

--

Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

Mobo: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
Mobo: HP ProBook 4540s (Clover)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.

Note: When specifying your bootloader, if using Clover legacy, please be sure to specify "Clover legacy"). Specifying "Clover" will be assumed as "Clover UEFI"
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top