- Joined
- Aug 27, 2016
- Messages
- 9
- Motherboard
- Asus H170-PRO
- CPU
- i7-6700
- Graphics
- Sapphire PULSE Radeon RX 580 8GB (Previously GTX 950)
- Mac
- Mobile Phone
I'm seeing an issue when I install the NC360T dual NIC ethernet card alongside the Bluetooth & Wifi combo card BCM943602CS where the wifi stop working due to "Wi-Fi: No hardware installed". If I remove the NC360T then wifi reappears so there's a clash of some sort between the two. I'd appreciate if anyone has any suggestions for what to try next to get them to work together (I initially assumed a hardware problem and shuffled the cards around, to no avail) as I'm very much just guessing now when trying to interpret information.
I've attached IORegistryExplorer output for when the system is running with (20170618 ZIP) and without (20170619 - eth card removed ZIP) the NC360T installed. I've also uploaded the CLOVER contents from my EFI partition. I'm going to poke around and see if I spot anything myself.
P.S. For the curious: The onboard NIC is flakey so I plan to disable it when I've "proved" the NC360T. Then I'll be routing forwarded services to one of the NICs and LAN "stuff" over the other. WiFi is pretty much just for things like Apple Watch.
I've attached IORegistryExplorer output for when the system is running with (20170618 ZIP) and without (20170619 - eth card removed ZIP) the NC360T installed. I've also uploaded the CLOVER contents from my EFI partition. I'm going to poke around and see if I spot anything myself.
P.S. For the curious: The onboard NIC is flakey so I plan to disable it when I've "proved" the NC360T. Then I'll be routing forwarded services to one of the NICs and LAN "stuff" over the other. WiFi is pretty much just for things like Apple Watch.