Contribute
Register

Removing extra kexts

Status
Not open for further replies.
Joined
Jun 2, 2015
Messages
103
Motherboard
Gigabyte X299 Gaming 7
CPU
9980XE
Graphics
Gigabyte 5700XT
Mac
  1. MacBook Pro
  2. Mac mini
  3. Mac Pro
Mobile Phone
  1. iOS
I've been using the following kexts since I first built a system almost two years ago. Upgraded to Mojave (10.14.3) and saw reference to deleting them some of them as they conflict or no longer valid. any help would be much appreciated:

AppleALC
AtherosE2200Ethernet
CodeCommander
FakeSMC
IntelGraphicsFixup
IntelMausEthernet
Lilu
NoVPAJPEG
RealtekRTL8111
USBInjectALL
WhateverGReen
XHCI-200-series-injector

running gigabyte z370 with 8700K, Vega 64, thunderbolt card, etc
 
I've been using the following kexts since I first built a system almost two years ago. Upgraded to Mojave (10.14.3) and saw reference to deleting them some of them as they conflict or no longer valid. any help would be much appreciated:

AppleALC
AtherosE2200Ethernet
CodeCommander
FakeSMC
IntelGraphicsFixup
IntelMausEthernet
Lilu
NoVPAJPEG
RealtekRTL8111
USBInjectALL
WhateverGReen
XHCI-200-series-injector

running gigabyte z370 with 8700K, Vega 64, thunderbolt card, etc

Hi there.

I have almost the same kexts. There's nothing bad in the list.

The ones I might "experiment" removing are the XHCI 200 - for example my own z370 doesn't need it although I have created an SSDT for USB. The Atheros ethernet - I left mine in place as it was put there by the installation process, not me. IntelMausi is the one the board needs. CodecCommander is used to restore audio after sleep, but again my board doesn't need it so I don't install it. IntelGraphicsFixup I don't use either as I don't configure the iGPU at all, instead using my RX560

:)
 
Actually quick search and I found it. Thanks!!
 
Status
Not open for further replies.
Back
Top