Contribute
Register

[Release] Hackintool v3.x.x

This is not the place to post issues with Clover or WhateverGreen.
where should i post it? cant find issue section on github
 
where should i post it? cant find issue section on github

For Clover you can post tickets on SourceForge. For WhateverGreen there are forums where vit9696 will respond to issues but you can't post certain links here so you'll need to do your own searching.
 
just updating my progress. I got the usb thing to work! >:). Thank you so much!.
 
Version 1.3.4 Released
- Added AllData connector patch method (RehabMan). Will try GFX0 if IGPU is not found
 
Version 1.3.5 Released
- Will try HDAS if HDEF is not found
 
Mods can you please pin this?
 
USB Port Patching

1. Apply the Port Limit patch (in Patch->Advanced) then File->Export->Clover config.plist
2. Place the USBInjectAll.kext into EFI/CLOVER/kexts/Other
3. You may also need XHCI-200-series-injector.kext, XHCI-300-series-injector.kext or XHCI-x99-injector.kext depending on your Intel chipset
4. Reboot your machine and then run Intel FB-Patcher again
5. Go to the General->USB tab (see screenshot) and plug and unplug a USB 2.0 and USB 3.0 device into each USB port on your system. The ports that are active will remain highlighted
6. Set each port to the appropriate Connector using the drop down list
NOTE: HSxx ports connected to USB3 ports should be set to USB3. USB-C have two ports associated with them so you will need a USB-C device and plug it in both ways
7. Remove any unused ports using the Delete button
8. Use the Export button to generate a USBPower.kext onto your Desktop. Copy this file into EFI/CLOVER/kexts/Other
9. You can now delete USBInjectAll.kext and disable the Port Limit Patch

Q. What is USBPower.kext?
A. It's a Codeless Kernel Extension used to inject the USB ports
Q. Do I need SSDT-UIAC.aml?
A. No, this method uses a codeless kext

Thanks to vit9696 for demonstrating this method of USB patching

View attachment 346168
why its showing this sign after installing USBPower.kext into L/E/?
Screenshot 2018-09-17 at 8.54.54 PM.png
 

Attachments

  • USBPower.kext.zip
    1.6 KB · Views: 141
Back
Top