[Release] Hackintool v3.x.x

[FrankyBreuninger]

The tool does not read / showa any values on my machine. Is there an issue with 10.14.3?

 

[GilDev]

The tool does not read / showa any values on my machine. Is there an issue with 10.14.3?

Same problem on my freshly installed 10.14.3 but it also did the same on 10.14.0.

 

[tmbt]

Same problem here with 10.14.3.
Every tabs are empty

 

[asheenlevrai]

USB Port Patching
macOS 10.14.1+ does not work with the USB port limit patch and therefore there is no way to have all ports available to configure at one time. RehabMan has updated USBInjectAll.kext to include boot flags for excluding groups of ports
1. Place the USBInjectAll.kext (for port discovery) into EFI/CLOVER/kexts/Other
USBInjectAll.kext Requirements:
• Clover Rename XHC1 -> XHC
• Clover Rename EHC1 -> EH01
• Clover Rename EHC2 -> EH02

...

1. Reboot with -uia_exclude_ss uia_include=HS01,HS02 boot flags

• Change the HS01,HS02 ports to the ones you have your mouse and keyboard attached

Can you please tell me how to do the red parts? Clover configurator?

For now I am stuck with all USB3.0 ports working at USB2.0 speed except for 1 USbB3.0 port on the front of the tower.
Please help. I'm stuck becasue I don't understand the beginning of the procedure
Tx
-a-

 

[asheenlevrai]

Hi

Different topic:
I am currently running 10.14.3 on the following:

• Z97-A
• i7 4790K
• HD4600 (4K 2160p @ 60Hz over DP)
• Philips Brillance 288p (28'' 4K UHD display), recognized as such by macOS
• Lilu+WEG
• (let me know if any other information is useful)

In Displays Properties, when I hit Scaled I have 4 icons offering HiDPI options.

• Looks like 3840x2160 (current)
• Looks like 1920x1080
• (2 other lower resolutions)

I wish I could have Looks like 2560x1440 in addition to the FHD and 4K resolutions.
It would be even better if there was Looks like 3008x1692 and Looks like 3360x1890, but this is not critical.

• I tried to achieve this by using Hackingtool. I went to the display tab and selected my display in the list (PHL 288P6L).
• I left PHL 288P6L (16:9) for Inject EDID
• I selected Manual for Resolution
• I added 2560x1440 Type HiDP4 and 2560x1440 Type Auto (since I don't know what the types mean).
• I left the 4 checkboxes as is (everything but Fix Monitor Ranges is selected).
• I clicked on Export and this generated 3 files and a folder on the desktop.
• I copied the .kext file (attached) into /L/E and deleted the remaining 2 files and the folder.
• Rebooted -> no change

I probably missed something obvious. Or my configuration is not ready to handle the .kext file created by hackingtool.

Let me know what you think.
Any advice is obviously very welcome.
Thank you for you help.
Best,
-a-

 

[pit512]

Can you please tell me how to do the red parts? Clover configurator?

For the rename, look in ACPI/DSDT/Patches/List Of Patches of Clover Configurator...

 

[asheenlevrai]

For the rename, look in ACPI/DSDT/Patches/List Of Patches of Clover Configurator...
View attachment 388094

Thank you so much!

However it seems that
Rename XHC1 -> XHC
is missing in the drop-down menu...
Is it elsewhere?

 

[pit512]

Rename XHC1 -> XHC is missing but should go in the same place.
Try to google it...

 

[asheenlevrai]

Try to google it...

found this:

config.plist DSDT patches:

Comment: Change XHCI to XHC
Find: 58484349
Replace: 5848435F

Comment: Change XHC1 to XHC
Find: 58484331
Replace: 5848435F

But not sure if I should use one, the other, or both...

should I rename to XHC (3 char.) or to XHC_ (4 char.)?

 

[pit512]

You probably don't need XHC rename, read Rehabman's thread...