Reboot loop after NVIDIA drivers installation

[Fred2Fish]

Hi,

This is my very first Hackintosh build so excuse my ignorance on certain points

The installation itself went well, I used Multibeast to install all the necessary drivers and the NVIDIA installer for my GTX1060.
However, now the build is stuck :
-> When using the GTX1060 the video output works fine until after the OSX loading screen, after that, there isn't any output anymore.
-> When using the mobo graphics, the build goes in a reboot loop, it crashes during the OSX loading screen.

Inside Clover I checked the option to use NVIDIA web drivers.

What can I do to get determine the bugs and get access again to OSX?

Thanks !

 

[tofuconfetti]

This thread will help you immensely. I just went through on my setup. It sounds like you are getting the black screen on bootup problem, which is relatively easy to fix. There is a LOT of misinformation on how to set all this up, but the information on Tonymacs thread was the right way.

https://www.tonymacx86.com/threads/...for-macos-sierra-10-12-1-367-15-10-15.205568/

If that thread doesn't explain it, then look how I solved the black screen problem during boot up on my GA-Z107X-Gaming 5 motherboard with a GTX 960 on this thread. Apparently the setup script provided in the second post missed changing the other info.plist file entry.

https://www.tonymacx86.com/threads/ga-z170mx-gaming-5-high-sierra-install-success.238376/

 

[Fred2Fish]

This thread will help you immensely. I just went through on my setup. It sounds like you are getting the black screen on bootup problem, which is relatively easy to fix. There is a LOT of misinformation on how to set all this up, but the information on Tonymacs thread was the right way.

https://www.tonymacx86.com/threads/...for-macos-sierra-10-12-1-367-15-10-15.205568/

If that thread doesn't explain it, then look how I solved the black screen problem during boot up on my GA-Z107X-Gaming 5 motherboard with a GTX 960 on this thread. Apparently the setup script provided in the second post missed changing the other info.plist file entry.

https://www.tonymacx86.com/threads/ga-z170mx-gaming-5-high-sierra-install-success.238376/

Hi Tofuconfetti,

I tested both methods, without any luck ...

Now, I don't have the black screen problem anymore, however the loading screen freezes at +/- 60%.
If I go into the Clover settings and I disable the NVidiaweb drivers, OSX loads normally.