- Joined
- Oct 10, 2012
- Messages
- 132
- Motherboard
- Asus ProART Z490-Creator 10G
- CPU
- i9-10900K
- Graphics
- RX 5700 XT
- Mac
- Classic Mac
- Mobile Phone
I'm building my new 9-series hack and playing with every memory setting I can think of to stop freezing under Yosemite.
My ram is Corsair Dominator platinum 2400Mhz DDR3 2x4gb placed in slot 1 and 3.
I have got it running stable with no crashes for days by turning off XMP in bios and keeping the ram at 1333Mhz, and also setting XMPDetection to No in Clover config.
Since then I have been playing with the voltages manually and managed to get it running without crashing at 2400Mhz with XMP enabled which yielded a big performance boost according to Geekbench.
My issue is that no matter what I set the RAM frequency to it always displays at 2133Mz in the system profiler, unless XMP detection is disabled and it reads the default 1333Mhz.
After googling this issue to death with nobody having this issue of 2400 ram displaying at 2133 regardless of the speed, I thought i'd start a thread.
I'm 99% sure this is a cosmetic issue as when i'm testing in geekbench it matches what is happening when i mirror the spec in windows geekbench.
It is worth noting that when i was using Chimera / Unibeast that the Ram displayed correctly as 2400mhz.
So, any ideas why 2400Mz RAM in XMP mode would display as 2133Mhz in Clover?
Thanks in advance, looking forward to posting my build when i get past these teething issues.
My ram is Corsair Dominator platinum 2400Mhz DDR3 2x4gb placed in slot 1 and 3.
I have got it running stable with no crashes for days by turning off XMP in bios and keeping the ram at 1333Mhz, and also setting XMPDetection to No in Clover config.
Since then I have been playing with the voltages manually and managed to get it running without crashing at 2400Mhz with XMP enabled which yielded a big performance boost according to Geekbench.
My issue is that no matter what I set the RAM frequency to it always displays at 2133Mz in the system profiler, unless XMP detection is disabled and it reads the default 1333Mhz.
After googling this issue to death with nobody having this issue of 2400 ram displaying at 2133 regardless of the speed, I thought i'd start a thread.
I'm 99% sure this is a cosmetic issue as when i'm testing in geekbench it matches what is happening when i mirror the spec in windows geekbench.
It is worth noting that when i was using Chimera / Unibeast that the Ram displayed correctly as 2400mhz.
So, any ideas why 2400Mz RAM in XMP mode would display as 2133Mhz in Clover?
Thanks in advance, looking forward to posting my build when i get past these teething issues.