RAID 0, GA-Z68MA-D2H-B3

[alf_mac]

Any one tested RAID 0 ?
on any Z68

GA-Z68MA-D2H-B3

we need drivers on Chimera to boot on a RAID set right ?

As my build is working 100% I need a new challenge

My build:
viewtopic.php?f=79&t=20943&p=134309#p134309


It looks like some are using this:

1TB (2x500MB) RAID 0 for EyeTV HD recording and editing - uses Apple RAID driver
viewtopic.php?f=64&t=6969&p=135231&hilit=raid#p135231


2x250GB Western Digital RE3 in RAID-0 Configuration (Using the MoBo's Built in Intel RAID Controller)
viewtopic.php?f=22&t=21044&p=134818&hilit=raid#p134818

 

[chrisynd]

I'd love to see some information on this. I had no luck getting Lion to recognize the "hardware" raid setup through the integrated motherboard RAID controller using RAID-0 nor by building a software raid via Disk Utility.

RAID in general seems to be a gap in the whole PC->Mac compatibility.

I should note that I only tested it using the 2x 6gbps ports; I haven't tried using the other ports for RAID - don't know that it'd matter.