pastrychef
Moderator
- Joined
- May 29, 2013
- Messages
- 19,458
- Motherboard
- Mac Studio - Mac13,1
- CPU
- M1 Max
- Graphics
- 32 Core
- Mac
- Classic Mac
- Mobile Phone
Well then...that's interesting...I couldn't get boot with any of the others, guess it's back to the drawing board...
What is the latest and best one to try?
In my experience with my Z390, I have found that AptioMemoryFix and OsxAptioFix3Drv work if EmuVariableUEFI is not installed.
Both can also work with EmuVariableUEFI installed, but I need to remove the drivers needed to enable FileVault support. This is how my system is currently configured. I've never used FileVault anyway. I just test it for compatibility.
I have not yet tested OsxAptioFix2Drv yet. I plan to test it out once I have a bit more time to sit down and go through a bunch of resets...
Your mileage may vary as all BIOSes are different...
This board requires EMU, though...
If you check NVRAM values in Hackintool without EmuVariable, there are only 2-3 entries present versus over a dozen when using Emulated...
As far as I know, all Z390 needs emulated NVRAM. But it's possible to boot without EmuVariableUEFI, just some things such as sleep won't work.
I need as close to a real Mac functionality as possible, so I need EmuVariable. I also need iGPU enabled alongside Vega. According to my research, this is not possible with any other Aptio besides the Free2000 variant.
I have read every ounce I could find since you posted that about this topic and the driver. I have tried every other variant with no slide, Slide=0 and the 2 slide values that work based on my memory map; nothing else works to get me booted...
Any ideas?