- Joined
- Feb 15, 2018
- Messages
- 317
- Motherboard
- Aorus Master Z490
- CPU
- i9-10900K
- Graphics
- 630
- Mac
- Mobile Phone
hi sorry for the late reply but I haven't been around for a few months, the problem is that you don't have a supported CPU. while a Nvidia card will work just fine with that CPU an AMD card won't work , it doesn't matter if is a 580 or whatever AMD card because the AMD drivers that are on Mojave requires a CPU with some specific instructions set and your CPU doesn't have those instructions set, so in order to use a AMD card on Mojave you will need a CPU that has support for those instructions setI had not read the progress of the publications, sorry. Now I know that the problem lies mainly in the CPU. Thanks, of equal
the good news is that you can use a Nvidia card and it will work just fine with full acceleration on Mojave without having to make any changes on clover, you will need something like a 650 or a 740, I tested both cards on Mojave with a E8400 core 2 CPU and it works just fine with full acceleration but you need to copy one file from High Sierra to Mojave
like I mentioned in my previous post
the only downside is that the 740 is only 2 gigs and you already have a 4 gigs video card but your 4 gb video card will not work with your current board or CPU, because of what I already explained but you can get a cheap 740 on ebay for 50 or less and have Mojave running in your 775 motherboard with you C2D
those are your 2 options, either change the board, cpu and ram and stayed with you card
not sure if your AMD cards works on Mojave either
or simply change your AMD video card for a Nvidia Kepler card and problem solved
sorry I took so long to answer
good luck
regards
Last edited: