Contribute
Register

Radeon Compatibility Guide - ATI/AMD Graphics Cards

Ma' boy use HDMI 2.0 cable or display port 1.2 for 4k 60Hz, check monitor menu to enable.


Cable check, displayport isnt gonna work, since this TV does not have any, in windows its working fine over HDMI, as it should be (currently in windows again, just messed up that freakin APFS container again, so have to reinstall the whole OS, and using the TV on 4k 60Hz).

Probably there is more issue at my setup:
1 EDID information from the TV are garbage. Its says its a 1920*1080p 65" TV, where in reality its a 3840*2160 43" TV.
2 macOS does not output 4k 60 Hz over HDMI


to solve the first problem, tried to use SwitchresX, but it said not supported...
For the second problem... Thats what i have found over multiple forums. But on the official apple support sites they say it is working...

So im still working on this question in the details...
 
Only for you, Giacomoleopardo.....there's nothing related to the Vega in my EFI, not one line of configuration. These two are the only things I'm using that relate to the Vega....and I'm using this EFI which I got from @kgp

And you should know that the problem fixed itself.....
 

Attachments

  • RadeonVegaLowFansSpeed.kext
    0 bytes · Views: 209
  • WhateverGreen.kext
    0 bytes · Views: 121
  • EFI-X99-10.13.5-System-290518.zip
    17.9 MB · Views: 116
Oh my! You've got some serious ACPI injection, there! That's almost fascinating! What about a whole new thread to discuss about it, without off-toping here too much?
 
Oh my! You've got some serious ACPI injection, there! That's almost fascinating! What about a whole new thread to discuss about it, without off-toping here too much?

In the EFI from @kgp, or in the Kext?

If you're talking about the EFI from @kgp, I'm sure some discussion including him would be useful.

If you're talking about the RadeonLowSpeedFan.kext, that originally came from another well known hackintosh site, and I just took a kext that somebody posted there and added my own fan control adjustments.
 
In the EFI from @kgp, or in the Kext?

If you're talking about the EFI from @kgp, I'm sure some discussion including him would be useful.

If you're talking about the RadeonLowSpeedFan.kext, that originally came from another well known hackintosh site, and I just took a kext that somebody posted there and added my own fan control adjustments.

@giacomoleopardo (my old Italian friend :lol:)..

If you referred to the SSDTs, I would prefer to have such kind of discussion directly along my threads:

1.) https://www.tonymacx86.com/threads/...c-pro-successful-build-extended-guide.229353/

2.) https://www.tonymacx86.com/threads/...o-x99-successful-build-extended-guide.227001/

@mm2margaret and you are both kindly invited! :wave:
 
@giacomoleopardo (my old Italian friend :lol:)..

If you referred to the SSDTs, I would prefer to have such kind of discussion directly along my threads:

1.) https://www.tonymacx86.com/threads/...c-pro-successful-build-extended-guide.229353/

2.) https://www.tonymacx86.com/threads/...o-x99-successful-build-extended-guide.227001/

@mm2margaret and you are both kindly invited! :wave:


You know, you two guys should talk....you do, uh, talk, or communicate somehow....sometimes, don't you?
 
You know, you two guys should talk....you do, uh, talk, or communicate somehow....sometimes, don't you?

not really .. we just had some cross-talk in former times here in the forum. We don't even know each other. I just always admired @giacomoleopardo's macOS Sierra X99 guide, which was the baseline for my first macOS Sierra X99 guide and also a fountain of motivation for all what I developed later-on.
 
Back
Top