Contribute
Register

Radeon Compatibility Guide - ATI/AMD Graphics Cards

Joined
Dec 21, 2012
Messages
192
Mobile Phone
  1. iOS
OS X doesn't have driver support for this card, so there's nothing you can do to make it work.
The Fury X device ID appeared in one kext a few months ago, but nothing happened since.
Damn that sucks aye. Whats a good AMD alternative?

Thanks
 
Joined
Oct 12, 2014
Messages
13
Motherboard
Gigabyte Z97-HD3
CPU
Intel Core i5-4690
Graphics
AMD Radeon R9 290
Mac
Classic Mac
Mobile Phone
Hi I have R9 290 which worked flawless under Yosemite using a modified AMD8000Controller.kext and AMDRadeonX4000.kext.

On El Capitan, I have got the card working using Clover-inject, but if I enter sleep from the Apple menu I only get "No Signal" on my screen after resuming. The machine does enter sleep properly (fans, lights turn off) but on resume (machine does kick on) I get no screen. Only solution is to reboot the system.

How can I solve this (as apart from this, my machine works perfectly)?

MB: GA-Z97HD3
CPU: i5-4690
RAM: 8GB 1600MHZ DDR3
GPU: R9 290 RoyalAce
HDD: 640GB HDD OSX, 256GB SSD (Win), 1TB HDD (data)
 
Joined
Feb 20, 2015
Messages
271
Motherboard
Asus P6T SE
CPU
2.81 GHz Intel Core i7
Graphics
Nvidia GTX 650 ti 1024 MB
Mac
  1. iMac
  2. MacBook Pro
Mobile Phone
  1. iOS
How about the 10.11.3 update that just came out?
 
Joined
Apr 10, 2013
Messages
66
Motherboard
ASUS P8Z77-V
CPU
I7-3770
Graphics
HD 7950
I need some help, it's been so long since my computer stopped working. So I have 2 Radeon 7950s that worked perfectly fine natively with 10.10.3 all I added was GraphicsEnabler=Yes during boot. Once I upgraded to 10.11.2 it will no longer boot. I receive two lines (1 for each graphics card) of "** GPU Hardware VM is enabled" and it just stays there. I have tried just about everything I can think of and everything online.


If I delete the AMDRadeonX4000.kext all graphics cards work but the 7950s have no acceleration
If I inject a fake device ID (ex 00000001) then only the intel cards work
If I do nothing I receiver two lines of the GPU VM error
If I flip the switch from Mac to Windows on the cards it goes into clover hardware test and never stops
If I remove a card I only get 1 copy of the error
If I remove both cards I don't receive the error
I have tried, GE, InjectATI, slide, dart, rootless, kext-div-mode (all things suggested on posts with this error)
I have tried restoring my kexts from 10.10.3
I have tried a kext called verde which is supposed to fix it
I have tried adding this is my X4000 (suggested in another post)
Code:
[COLOR=#222222][FONT=Verdana]<key>cail_properties</key>
[/FONT][/COLOR]
Code:
          <dict>
                <key>CAIL_DisableDrmdmaPowerGating</key>
                <integer>1</integer>
                <key>CAIL_DisableDynamicGfxMGPowerGating</key>
                <integer>1</integer>
                <key>CAIL_DisableGfxCGPowerGating</key>
                <integer>1</integer>
                <key>CAIL_DisableGmcPowerGating</key>
                <integer>1</integer>
                <key>CAIL_DisableStaticGfxMGPowerGating</key>
                <integer>1</integer>
                <key>CAIL_DisableUVDPowerGating</key>
                <integer>0</integer>
                <key>CAIL_DisableVCEPowerGating</key>
                <integer>1</integer>
[COLOR=#454545][FONT=Helvetica][COLOR=#222222][FONT=Verdana]</dict>[/FONT][/COLOR][/FONT][/COLOR]

I have tried adding this (another post)
Code:
[COLOR=#222222][FONT=Verdana]<key>cail_properties</key>
[/FONT][/COLOR]
Code:
          <dict>
                <key>CAIL_DisableDrmdmaPowerGating</key>
                <integer>1</integer>
                <key>CAIL_DisableDynamicGfxMGPowerGating</key>
                <integer>1</integer>
                <key>CAIL_DisableGfxCGPowerGating</key>
                <integer>1</integer>
                <key>CAIL_DisableGmcPowerGating</key>
                <integer>1</integer>
                <key>CAIL_DisableStaticGfxMGPowerGating</key>
                <integer>1</integer>
                <key>CAIL_DisableUVDPowerGating</key>
                <integer>0</integer>
                <key>CAIL_DisableVCEPowerGating</key>
                <integer>1</integer>
            </dict>
            <key>sensor-properties</key>
            <array>
                <dict>
                    <key>device_type</key>
                    <data>
                    Z3B1LXNlbnNvcg==
                    </data>
                    <key>location</key>
                    <string>GPU</string>
                    <key>name</key>
                    <string>gpu-sensor</string>
                    <key>polling-period</key>
                    <data>
                    AAAAAQAAAAA=
                    </data>
                    <key>reg</key>
                    <data>
                    AAAAAg==
                    </data>
                    <key>sample-period</key>
                    <data>
                    AAAAAACYmAA=
                    </data>
                    <key>sensor-id</key>
                    <data>
                    AAAABg==
                    </data>
                    <key>version</key>
                    <data>
                    AAAAAg==
                    </data>
                    <key>zone</key>
                    <data>
                    AAAAAg==
                    </data>
                </dict>
[COLOR=#454545][FONT=Helvetica][COLOR=#222222][FONT=Verdana]</array>[/FONT][/COLOR][/FONT][/COLOR]

None of this has worked and I end up with the same GPU VM error. Any ideas on what I can do? Thank you for your time and I hope to hear back from you shortly.
 

Attachments

  • IMG_3983.jpg
    IMG_3983.jpg
    1,015.1 KB · Views: 74
  • config.plist
    5.7 KB · Views: 183
Top