Contribute
Register

R7 260X and Mojave installation

Status
Not open for further replies.
Joined
May 12, 2020
Messages
7
Motherboard
Z390 M Ultra durable
CPU
I7 9700K
Graphics
RX 550
Hi everyone.

First i'll start with my build:

-Gigabyte Z390M Gaming
-2X 16go Corsair Vengeance
-R7 260X
-500 GO SSD
-I7 9700K

Here is my problem, when I'm one done setting up my bios my computer restarts and then no images at all. Is there anyone here who have encountered this issue?
 
Hi everyone.

First i'll start with my build:

-Gigabyte Z390M Gaming
-2X 16go Corsair Vengeance
-R7 260X
-500 GO SSD
-I7 9700K

Here is my problem, when I'm one done setting up my bios my computer restarts and then no images at all. Is there anyone here who have encountered this issue?
The problem appears after you configured the BIOS, saved the settings and restarted the computer? And not when you attempted to boot from a MacOS USB install stick?

What BIOS settings have you changed?
 
Yup right after i saved and restart.
 
Yup right after i saved and restart.
The monitor output will depend on your bios settings. IGPU as primary display output or PCIe (graphics card) will determine whether the motherboard or graphics card will show a screen.
plug monitor cable into each and test.
 
Already did and nothing with both... I had to reset the motherboard to have image again
 
Status
Not open for further replies.
Back
Top