Contribute
Register

Quick questions

Status
Not open for further replies.
Joined
Jul 1, 2015
Messages
79
Motherboard
GIGABYTE Z270X ULTRA GAMING
CPU
I5 7600K
Graphics
GTX 1060
Mac
  1. iMac
  2. MacBook Pro
Mobile Phone
  1. iOS
Hi, everyone,
I have a Lenovo Ideapad 320 14iKB
And I've successfully installed MacOS Mojave
Everything works except for three things: sleep, wifi and bluetooth
I took all EFI and kexts from:
https://www.tonymacx86.com/threads/success-mojave-on-lenovo-ideapad-320-15ikb-model-80yh.261428/
(Of course I changed the serial number)

My problem with sleep,
I put the laptop into sleep and he in sleep after a few seconds. But when I try to wake it up everything does not respond and the entire system gets stuck and the only way to get it out is to do a hard reset.
Is something missing for sleep to work properly?

I already realized that because the card inside my laptop, WiFi and Bluetooth will never work (I have a Realtek built-in card)
So I ordered BCM94350ZAE and after a few good days of experiments I realized I made a mistake in this choice. And I did not have to order this card
I tried every guide I found.
Each time there is a kernel panic and when there is no, so the card is not recognized, the closest I managed to activate it the whole system is made is unresponsive and unstable
Something very strange !!
So I gave up and realized I had to buy the bcm94352z
So Ok after all this digging, I'd like to ask a few questions about this card because I've seen guides and comments on it but I wanted to ask myself.

I realized that he had two versions of DELL and one of Lenovo to the extent that I would buy DELL's. Would he work on my laptop? Or is it better to buy Lenovo?

Do you offer better cards? There are known issues on this card (bcm94352z) or is it simple to buy and install some kexts and everything should work (2.4G, 5G bluetooth, airdrop, handoff etc)?

Hope I asked everything. If there are other things I need to know about the issues I presented here I would love to hear.

I'll attach my EFI folder in case you want to check everything (probably)(I deleted all the kexts that were used during the attempts to install the card)

Waiting for your response
Thanks
Itay
 

Attachments

  • EFI.zip
    24.4 MB · Views: 222
Last edited:

Not a Desktop - Moved to Laptop Support.
 

Not a Desktop - Moved to Laptop Support.
Ok sorry I did not know
 
Ok sorry I did not know
best to read up on the faq and the laptop guide for some info

also you may want to update your config.plist to the latest for mojave etc

FAQ

Link to laptop guide:

How and where to install kexts:
 
best to read up on the faq and the laptop guide for some info

also you may want to update your config.plist to the latest for mojave etc

FAQ

Link to laptop guide:

How and where to install kexts:
thanks for the reply
Unfortunately, this does not answer what I was looking for
 
thanks for the reply
Unfortunately, this does not answer what I was looking for
if you have made changes, ie installed your kexts properly etc
Use this tool and upload your problem reporting files:
 
if you have made changes, ie installed your kexts properly etc
Use this tool and upload your problem reporting files:
Hey I think you did not understand what I meant by opening this post
I asked top questions about the WiFI card (bcm94352z)
 
Hey I think you did not understand what I meant by opening this post
I asked top questions about the WiFI card (bcm94352z)
ok

as you haven't uploaded full problem reporting files, have you done this yet?

did you also re extract and patch your DSDT when you swapped the wifi card?
 

Attachments

  • debug_22122.zip
    5.2 MB · Views: 159
No.
How do you do that? Should I have done that?
kexts are not installed correctly, see my link above about installing kexts

only essential kexts belong in clover/kexts/other

and all kexts are to be installed to /L/E

you will notice you have duplicate kexts in both places which is fine

config.plist:
InjectKexts should be set to Detect

also your config.plist is not updated for Mojave, again check the laptop guide for an updated one

you already have a DSDT file i assumed you already know how to setup your own DSDT? if you have used a DSDT from another laptop, that is wrong:
 
Status
Not open for further replies.
Back
Top