0:100 0:100 MemLog inited, TSC freq: 3092973718
0:100 0:000 LegacyRegion2: Chipset/proc: 0x01008086
0:100 0:000 Next Generation Core processors (PAM 0x80-0x86)
0:100 0:000 Test PAM1=(0x41=90, 0x5a=00, 0x81=11, 0x91=00) at chipset 01008086
0:100 0:000 , Install = Success
0:123 0:023 BiosVideoDriverBindingStart!
0:123 0:000 BiosVideoCheckForVbe
0:123 0:000 EdidOverride not found
0:152 0:028 Edid1+
0:152 0:000 found Detail Timing 2560x1600
0:152 0:000 found Detail Timing 1280x800
0:181 0:028 Edid0+
0:181 0:000 found Detail Timing 2560x1600
0:181 0:000 ... already present
0:181 0:000 found Detail Timing 1280x800
0:181 0:000 ... already present
0:186 0:005 0 1152x864 attr=BB - ok, edid-
0:186 0:000 1 1280x960 attr=BB - ok, edid-
0:187 0:000 2 640x480 attr=BB - ok, edid-, 640x480, working, highest, pref=2
0:187 0:000 3 800x600 attr=BB - ok, edid-, 800x600, working, highest, pref=3
0:187 0:000 4 1024x768 attr=BB - ok, edid-, 1024x768, working, highest, pref=4
0:187 0:000 5 1280x1024 attr=BB - ok, edid-
0:188 0:000 6 1400x1050 attr=BB - ok, edid-
0:188 0:000 7 1600x1200 attr=BB - ok, edid-
0:189 0:000 8 1792x1344 attr=BB - ok, edid-
0:189 0:000 9 1856x1392 attr=BB - ok, edid-
0:190 0:000 10 1920x1440 attr=BB - ok, edid-
0:190 0:000 BV new mode: 4 1024x768
0:298 0:108 SetMode pref 4 (4) = Success
8:968 8:670
8:968 0:000 Now is 4.4.2016, 16:52:14 (GMT+2047)
8:968 0:000 Starting Clover rev 3333 on CLOVER EFI
8:968 0:000 SelfDevicePath=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0x0,0x0)\HD(2,GPT,A18C0AEE-A6B5-4196-AA7D-0C9C2AC678D8,0x40800,0x64000) @BDE38F98
8:968 0:000 SelfDirPath = \EFI\CLOVER
8:968 0:000 Total Memory Slots Count = 4
8:968 0:000 Type 17 Index = 0
8:968 0:000 SmbiosTable.Type17->Speed = 1600MHz
8:968 0:000 SmbiosTable.Type17->Size = 8192MB
8:968 0:000 SmbiosTable.Type17->Bank/Device = A1_BANK0 A1_DIMM0
8:968 0:000 Type 17 Index = 1
8:968 0:000 SmbiosTable.Type17->Speed = 1600MHz
8:968 0:000 SmbiosTable.Type17->Size = 8192MB
8:968 0:000 SmbiosTable.Type17->Bank/Device = A1_BANK1 A1_DIMM1
8:968 0:000 Type 17 Index = 2
8:968 0:000 SmbiosTable.Type17->Speed = 1600MHz
8:968 0:000 SmbiosTable.Type17->Size = 8192MB
8:968 0:000 SmbiosTable.Type17->Bank/Device = A1_BANK2 A1_DIMM2
8:968 0:000 Type 17 Index = 3
8:968 0:000 SmbiosTable.Type17->Speed = 1600MHz
8:968 0:000 SmbiosTable.Type17->Size = 8192MB
8:968 0:000 SmbiosTable.Type17->Bank/Device = A1_BANK3 A1_DIMM3
8:968 0:000 Boot status=0
8:968 0:000 Clover revision: 3333 running on To Be Filled By O.E.M.
8:968 0:000 ... with board P67 Extreme6
8:968 0:000 CPU Vendor = 756E6547 Model=206A5
8:968 0:000 The CPU supported turbo
8:968 0:000 BrandString = Genuine Intel(R) CPU 0 @ 3.10GHz
8:968 0:000 MSR 0xE2 before patch 1E008400
8:968 0:000 MSR 0xE2 is locked, PM patches will be turned on
8:968 0:000 MSR 0xE4 00010414
8:968 0:000 MSR 0xCE 00001000_78011F00
8:968 0:000 non-usable FLEX_RATIO = F0000
8:968 0:000 corrected FLEX_RATIO = E0000
8:968 0:000 MSR 0x1B0 00000000
8:968 0:000 FSBFrequency=135MHz DMIvalue=100000kHz
8:968 0:000 Corrected FSBFrequency=100MHz
8:968 0:000 Vendor/Model/Stepping: 0x756E6547/0x2A/0x5
8:968 0:000 Family/ExtFamily: 0x6/0x0
8:968 0:000 MaxDiv/MinDiv: 31.0/16
8:968 0:000 Turbo: 42/42/42/42
8:968 0:000 Features: 0xBFEBFBFF
8:968 0:000 Threads: 8
8:968 0:000 Cores: 4
8:968 0:000 FSB: 100 MHz
8:968 0:000 CPU: 4200 MHz
8:968 0:000 TSC: 4200 MHz
8:968 0:000 PIS: 400 MHz
8:968 0:000 PCI (00|00:00.00) : 8086 0100 class=060000
8:968 0:000 PCI (00|00:01.00) : 8086 0101 class=060400
8:968 0:000 PCI (00|01:00.00) : 1002 68BE class=030000
8:968 0:000 Found Radeon model=ATI Radeon HD 5750 Series
8:968 0:000 PCI (00|01:00.01) : 1002 AA58 class=040300
8:968 0:000 PCI (00|00:16.00) : 8086 1C3A class=078000
8:968 0:000 PCI (00|00:1A.00) : 8086 1C2D class=0C0320
8:968 0:000 PCI (00|00:1B.00) : 8086 1C20 class=040300
8:968 0:000 PCI (00|00:1C.00) : 8086 1C10 class=060400
8:968 0:000 PCI (00|00:1C.04) : 8086 1C18 class=060400
8:969 0:000 PCI (00|03:00.00) : 1B4B 9120 class=010601
8:969 0:000 PCI (00|00:1C.06) : 8086 1C1C class=060400
8:969 0:000 PCI (00|04:00.00) : 1B6F 7023 class=0C0330
8:969 0:000 PCI (00|00:1C.07) : 8086 1C1E class=060400
8:969 0:000 PCI (00|05:00.00) : 10B5 8608 class=060400
8:969 0:000 PCI (00|06:01.00) : 10B5 8608 class=060400
8:969 0:000 PCI (00|07:00.00) : 1B6F 7023 class=0C0330
8:969 0:000 PCI (00|06:04.00) : 10B5 8608 class=060400
8:969 0:000 PCI (00|08:00.00) : 1B21 1080 class=060400
8:969 0:000 PCI (00|06:05.00) : 10B5 8608 class=060400
8:969 0:000 PCI (00|0A:00.00) : 1B6F 7023 class=0C0330
8:969 0:000 PCI (00|06:06.00) : 10B5 8608 class=060400
8:969 0:000 PCI (00|06:07.00) : 10B5 8608 class=060400
8:969 0:000 PCI (00|0C:00.00) : 1B4B 9120 class=010601
8:969 0:000 PCI (00|06:08.00) : 10B5 8608 class=060400
8:969 0:000 PCI (00|0D:00.00) : 10EC 8168 class=020000
8:969 0:000 LAN 0, Vendor=10EC, MMIO=B000
8:969 0:000 PCI (00|06:09.00) : 10B5 8608 class=060400
8:969 0:000 PCI (00|00:1D.00) : 8086 1C26 class=0C0320
8:969 0:000 PCI (00|00:1F.00) : 8086 1C46 class=060100
8:969 0:000 PCI (00|00:1F.02) : 8086 1C02 class=010601
8:969 0:000 PCI (00|00:1F.03) : 8086 1C22 class=0C0500
8:969 0:000 Clover load options size = 0 bytes
8:971 0:001 Using OEM config.plist at path: EFI\CLOVER\config.plist
8:971 0:000 EFI\CLOVER\config.plist loaded: Success
8:971 0:000 Found theme directory: bootcamp
8:973 0:001 Found theme directory: embedded
8:973 0:000 Found theme directory: random
8:974 0:000 Loading early settings
8:974 0:000 timeout set to 3
8:974 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0)
8:974 0:000 KextsToPatch: 3 requested
8:974 0:000 KextsToPatch 0: AppleAHCIPort (External icons patch) Kext bin patch, data len: 8
8:974 0:000 KextsToPatch 1: AppleHDA (Realtek ALC Codec Patch) Kext bin patch, data len: 4
8:974 0:000 KextsToPatch 2: AppleHDA (Realtek ALC 892 Patch) Kext bin patch, data len: 4
8:974 0:000 Default theme: bootcamp
8:974 0:000 Hiding entries with string \EFI\BOOT\BOOTX64.EFI
8:974 0:000 Hiding entries with string Windows
8:974 0:000 LoadDrivers() start
8:974 0:000 Loading FSInject-64.efi status=Success
8:975 0:000 Loading VBoxHfs-64.efi status=Success
8:975 0:000 - driver needs connecting
8:975 0:000 Video bios patch requested or CustomEDID - forcing video reconnect
8:975 0:000 2 drivers needs connecting ...
8:975 0:000 PlatformDriverOverrideProtocol->GetDriver overriden
8:975 0:000 Video driver loaded: disconnect Success
9:070 0:094 VideoBiosPatchNativeFromEdid:
9:070 0:000 Bios: ATI, MasterDataTables: 0xCA946, std_vesa: 0xCA98A, ati_mode_table: 0xCA98E, mode_table_size: 0x1F8 BT_ATI_2
9:070 0:000 VideoBiosPatchInit(LegacyRegion = Not Found, LegacyRegion2 = Success) = Success
9:070 0:000 VideoBiosUnlock: unlocked
9:070 0:000 Patching: BT_ATI_2
9:070 0:000 Parse Edid: descriptor block 0 is timing descriptor (h_active: 2560, v_active: 1600, h_sync_offset: 48, h_sync_width: 32, h_blanking: 160, v_blanking: 46, pixel_clock: 26850, v_sync_offset: 3, v_sync_width: 6)
9:070 0:000 mode 0 (320x200) patched to 2560x1600
9:070 0:000 VideoBiosLock: Success
9:076 0:005 BiosVideoDriverBindingStart!
9:076 0:000 BiosVideoCheckForVbe
9:076 0:000 EdidOverride not found
9:105 0:028 Edid1+
9:105 0:000 found Detail Timing 2560x1600
9:105 0:000 found Detail Timing 1280x800
9:134 0:028 Edid0+
9:134 0:000 found Detail Timing 2560x1600
9:134 0:000 ... already present
9:134 0:000 found Detail Timing 1280x800
9:134 0:000 ... already present
9:136 0:002 0 2560x1600 attr=BB - ok, edid+, working, highest, pref=0
9:139 0:002 1 1152x864 attr=BB - ok, edid-
9:139 0:000 2 1280x960 attr=BB - ok, edid-
9:139 0:000 3 640x480 attr=BB - ok, edid-, 640x480, working
9:140 0:000 4 800x600 attr=BB - ok, edid-, 800x600, working
9:140 0:000 5 1024x768 attr=BB - ok, edid-, 1024x768, working
9:140 0:000 6 1280x1024 attr=BB - ok, edid-
9:140 0:000 7 1400x1050 attr=BB - ok, edid-
9:141 0:000 8 1600x1200 attr=BB - ok, edid-
9:141 0:000 9 1792x1344 attr=BB - ok, edid-
9:142 0:000 10 1856x1392 attr=BB - ok, edid-
9:143 0:000 11 1920x1440 attr=BB - ok, edid-
9:143 0:000 BV new mode: 0 2560x1600
9:353 0:210 SetMode pref 0 (0) = Success
9:580 0:227 LoadDrivers() end
9:580 0:000 SetScreenResolution: 2560x1600 - already set
9:580 0:000 Console modes reported: 4, available modes:
9:580 0:000 Mode 1: 80x25
9:580 0:000 Mode 2: 80x50
9:580 0:000 Mode 3: 100x31
9:580 0:000 Mode 4: 320x84 (current mode)
9:580 0:000 SetScreenResolution: 2560x1600 - already set
9:580 0:000 reinit: self device path=PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0x0,0x0)\HD(2,GPT,A18C0AEE-A6B5-4196-AA7D-0C9C2AC678D8,0x40800,0x64000)
9:580 0:000 ScanSPD() start
9:581 0:000 SMBus CmdReg: 0x3
9:581 0:000 Scanning SMBus [8086:1C22], mmio: 0xFE704004, ioport: 0xF000, hostc: 0x1
9:581 0:000 Slots to scan [8]...
9:596 0:014 SPD[0]: Type 11 @0x50
9:604 0:008 Found module with XMP version 1.3DDR speed 1600MHz
9:604 0:000 Slot: 0 Type 24 8192MB 1600MHz Vendor=Kingston PartNo=KHX2133C11D38GX SerialNo=0302000E07020E08
9:619 0:014 SPD[1]: Type 11 @0x51
9:627 0:008 Found module with XMP version 1.3DDR speed 1600MHz
9:627 0:000 Slot: 1 Type 24 8192MB 1600MHz Vendor=Kingston PartNo=KHX2133C11D38GX SerialNo=000D03080E050B02
9:642 0:014 SPD[2]: Type 11 @0x52
9:650 0:008 Found module with XMP version 1.3DDR speed 1600MHz
9:650 0:000 Slot: 2 Type 24 8192MB 1600MHz Vendor=Kingston PartNo=KHX2133C11D38GX SerialNo=000D03080E080B02
9:665 0:014 SPD[3]: Type 11 @0x53
9:673 0:008 Found module with XMP version 1.3DDR speed 1600MHz
9:673 0:000 Slot: 3 Type 24 8192MB 1600MHz Vendor=Kingston PartNo=KHX2133C11D38GX SerialNo=000D03080E090B02
9:706 0:032 ScanSPD() end
9:712 0:006 Get Acpi Tables List from RSDT:
9:712 0:000 Found table: FACP A M I len=132
9:712 0:000 Found table: APIC A M I len=146
9:712 0:000 Found table: SSDT PROC len=470
9:712 0:000 Found table: MCFG A M I len=60
9:712 0:000 Found table: AAFT OEMAAFT len=111
9:712 0:000 Found table: HPET A M I len=56
9:712 0:000 Calibrated TSC frequency =3092973718 =3092MHz
9:712 0:000 Loading main settings
9:712 0:000 Dropping 2 tables
9:712 0:000 Drop table 0 signature="SSDT" (54445353) table-id="CpuPm" (0000006D50757043)
9:712 0:000 set table: 54445353, 6D50757043 to drop:
9:712 0:000 Drop table 1 signature="SSDT" (54445353) table-id="Cpu0Ist" (0074734930757043)
9:712 0:000 set table: 54445353, 74734930757043 to drop:
9:712 0:000 Config set ChassisType=0xD
9:713 0:000 found 9 volumes with blockIO
9:713 0:000 0. Volume:
9:713 0:000 PcieRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x6,0x0)\USB(0x3,0x0)
9:717 0:003 USB volume
9:717 0:000 USB volume
9:717 0:000 USB volume
9:717 0:000 1. Volume:
9:717 0:000 PcieRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x6,0x0)\USB(0x3,0x0)\HD(1,MBR,0x9736C29B,0x800,0xAEA37000)
9:720 0:003 Result of bootcode detection: bootable Windows (vista,win)
9:720 0:000 USB volume
9:720 0:000 USB volume
9:720 0:000 USB volume
9:720 0:000 2. Volume:
9:720 0:000 PcieRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x6,0x0)\USB(0x3,0x0)\HD(2,MBR,0x9736C29B,0xAEA37BFE,0x3A3CFBF6)
9:723 0:003 USB volume
9:723 0:000 USB volume
9:723 0:000 USB volume
9:723 0:000 3. Volume:
9:723 0:000 PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0x0,0x0)
9:723 0:000 Result of bootcode detection: bootable unknown (legacy)
9:723 0:000 4. Volume:
9:723 0:000 PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)
9:723 0:000 found optical drive
9:723 0:000 5. Volume:
9:723 0:000 PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0x0,0x0)\HD(1,GPT,70B32A2B-E845-4BC1-9A6F-CD2CC4AF2C09,0x22,0x40000)
9:723 0:000 6. Volume:
9:723 0:000 PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0x0,0x0)\HD(2,GPT,A18C0AEE-A6B5-4196-AA7D-0C9C2AC678D8,0x40800,0x64000)
9:724 0:000 Result of bootcode detection: bootable Clover (clover)
9:724 0:000 This is SelfVolume !!
9:724 0:000 7. Volume:
9:724 0:000 PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0x0,0x0)\HD(3,GPT,914CEE3F-BA7C-40D1-97FD-9EDFAB3DF5C3,0xA4800,0xD71D000)
9:724 0:000 8. Volume:
9:724 0:000 PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0x0,0x0)\HD(4,GPT,0BF9E72B-D1DC-4175-BF35-F4C42E55C99C,0xD7C1800,0x136000)
9:726 0:001 Loading nvram.plist from Vol 'yosemite' - loaded, size=573
9:726 0:000 PutNvramPlistToRtVars ...
9:726 0:000 Adding Key: LocationServicesEnabled: Size = 1, Data: 01
9:726 0:000 Adding Key: SystemAudioVolume: Size = 1, Data: 90
9:726 0:000 Adding Key: bootercfg: Size = 2, Data: 00 00
9:726 0:000 Adding Key: csr-active-config: Size = 4, Data: 00 00 00 00
9:726 0:000 Adding Key: fmm-computer-name: Size = 15, Data: 47 65 72 73 69 6F E2 80 99 73 20 69 4D 61 63
9:726 0:000 Adding Key: prev-lang:kbd: Size = 4, Data: 65 6E 3A 30
9:726 0:000 Adding Key: security-mode: String: Size = 4, Val = 'none'
9:726 0:000 Using theme 'bootcamp' (EFI\CLOVER\themes\bootcamp)
9:726 0:000 Warning! Character width should be even!
9:726 0:000 Choosing theme bootcamp
9:726 0:000 Custom legacy start
9:726 0:000 Custom legacy end
9:726 0:000 Scanning legacy ...
9:726 0:000 0: 'Whole Disc Boot' (legacy) not legacy
9:726 0:000 1: 'Legacy HD1' (vista,win) add legacy
9:730 0:003 added 'Boot Windows from Legacy HD1' OSType=2 Icon=vista,win
9:730 0:000 2: 'HFS+' (legacy) not legacy
9:730 0:000 3: 'Whole Disc Boot' (legacy) not legacy
9:730 0:000 4: 'Whole Disc Boot' (legacy) not legacy
9:730 0:000 5: 'Legacy HD1' (legacy) not legacy
9:730 0:000 6: 'EFI' (clover) add legacy
9:733 0:002 added 'Boot Clover from EFI' OSType=3 Icon=clover
9:733 0:000 7: 'yosemite' (legacy) not legacy
9:733 0:000 8: 'Recovery HD' (legacy) not legacy
9:733 0:000 Custom entries start
9:733 0:000 Custom entries finish
9:733 0:000 Scanning loaders...
9:733 0:000 0: 'Whole Disc Boot' no file system
9:733 0:000 1: 'Legacy HD1' no file system
9:733 0:000 2: 'HFS+'
9:745 0:012 3: 'Whole Disc Boot' no file system
9:745 0:000 4: 'Whole Disc Boot' no file system
9:745 0:000 5: 'Legacy HD1' no file system
9:745 0:000 6: 'EFI'
9:761 0:016 7: 'yosemite'
9:762 0:001 AddLoaderEntry for Volume Name=yosemite
9:763 0:001 Check if volume Is Hibernated:
9:763 0:000 Check sleep image 'by signature':
9:766 0:002 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success
9:766 0:000 SleepImage name from pref: ImageVolume = 'yosemite', ImageName = '\private\var\vm\sleepimage'
9:767 0:001 Reading first 512 bytes of sleepimage ...
9:768 0:000 OurBlockIoRead: Lba=9DA4600, Offset=13B48C0000 (BlockSize=512)
9:768 0:000 sig lion: 7A7A7A7A
9:768 0:000 sig snow: 0
9:768 0:000 no valid sleep image offset was found
9:768 0:000 Reading completed -> Success
9:768 0:000 sleepimage offset could not be acquired
9:768 0:000 hibernated: no - sign
9:782 0:014 8: 'Recovery HD'
9:782 0:000 AddLoaderEntry for Volume Name=Recovery HD
9:797 0:014 Custom tool start
9:797 0:000 Custom tool end
9:797 0:000 found tool \EFI\CLOVER\tools\Shell64U.efi
9:797 0:000 Checking EFI partition Volume 6 for Clover
9:797 0:000 Found Clover
9:798 0:001 GetEfiBootDeviceFromNvram: efi-boot-device-data not found
9:798 0:000 EfiBootVolume not found
9:798 0:000 found entry 2. 'Boot Mac OS X from yosemite', Volume 'yosemite', DevicePath 'PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x5,0x0,0x0)\HD(3,GPT,914CEE3F-BA7C-40D1-97FD-9EDFAB3DF5C3,0xA4800,0xD71D000)\System\Library\CoreServices\boot.efi'
9:798 0:000 DefaultIndex=2 and MainMenu.EntryCount=10
9:798 0:000 Use anime=logo_3D frames=50
10:124 0:325 Found Mouse device:
10:125 0:000 GUI ready
11:575 1:450 BootOption of the entry is empty
11:575 0:000 StartLoader() start
11:575 0:000 Entry->Settings: <null string>
11:575 0:000 Finally: Bus=99773kHz CPU=3093MHz
11:575 0:000 Kernel and Kext Patches at BEAB72B0:
11:575 0:000 Allowed: y
11:575 0:000 Debug: n
11:575 0:000 KernelCpu: n
11:575 0:000 Lapic: n
11:575 0:000 Haswell-E: n
11:575 0:000 AICPUPM: n
11:575 0:000 AppleRTC: n
11:575 0:000 KernelPm: n
11:575 0:000 FakeCPUID: 0x0
11:575 0:000 ATIController: null
11:575 0:000 ATIDataLength: 0
11:575 0:000 0 Kexts to load
11:575 0:000 3 Kexts to patch
11:575 0:000 KextPatch[0]: 8 bytes, AppleAHCIPort
11:575 0:000 KextPatch[1]: 4 bytes, AppleHDA
11:575 0:000 KextPatch[2]: 4 bytes, AppleHDA
11:575 0:000 Loading boot.efi status=Success
11:742 0:166 GetOSVersion: : 10.10.5
11:742 0:000 insert table 9 for dev 0:0
11:742 0:000 insert table 9 for dev 0:1
11:742 0:000 insert table 9 for dev 0:0
11:742 0:000 Channels: 2
11:742 0:000 Interleave: 0 2 1 3 4 6 5 7 8 10 9 11 12 14 13 15 16 18 17 19 20 22 21 23
11:742 0:000 SMBIOS Type 17 Index = 0 => 0 0:
11:742 0:000 BANK0 DIMM0 1600MHz 8192MB
11:742 0:000 mTotalSystemMemory = 8192
11:742 0:000 SMBIOS Type 17 Index = 1 => 2 2:
11:742 0:000 BANK1 DIMM0 1600MHz 8192MB
11:742 0:000 mTotalSystemMemory = 16384
11:742 0:000 SMBIOS Type 17 Index = 2 => 1 1:
11:742 0:000 BANK0 DIMM1 1600MHz 8192MB
11:742 0:000 mTotalSystemMemory = 24576
11:742 0:000 SMBIOS Type 17 Index = 3 => 3 3:
11:742 0:000 BANK1 DIMM1 1600MHz 8192MB
11:742 0:000 mTotalSystemMemory = 32768
11:742 0:000 NumberOfMemoryDevices = 4
11:742 0:000 Type20[0]->End = 0x7FFFFF, Type17[0] = 0x2000
11:742 0:000 Type20[1]->End = 0xFFFFFF, Type17[1] = 0x6000
11:742 0:000 Type20[2]->End = 0x17FFFFF, Type17[2] = 0xC000
11:742 0:000 Type20[3]->End = 0x1FFFFFF, Type17[3] = 0x14000
11:742 0:000 Table 131 is present, CPUType=10
11:742 0:000 Change to: 703
11:742 0:000 RSDT 0xBF5D7028
11:742 0:000 FADT from RSDT: 0xBF5D70C8
11:742 0:000 XSDT 0xBF5D7068
11:742 0:000 FADT from XSDT: 0xBF5DE970
11:742 0:000 Xsdt reallocation done
11:742 0:000 old FADT length=F4
11:742 0:000 Found OperationRegion(NBNV, SystemMemory, BF608D98, ...)
11:742 0:000 Found OperationRegion(CSDT, SystemMemory, BF609D98, ...)
11:742 0:000 Found OperationRegion(HCNT, SystemMemory, FED1F404, ...)
11:742 0:000 Found OperationRegion(TMMB, SystemMemory, FED40000, ...)
11:742 0:000 Found OperationRegion(TVID, SystemMemory, FED40F00, ...)
11:742 0:000 Found OperationRegion(TPMR, SystemMemory, FED40000, ...)
11:742 0:000 Found OperationRegion(LEDM, SystemMemory, FED1F410, ...)
11:742 0:000 Apply DsdtFixMask=0x00000000 old way
11:742 0:000 drop _DSM mask=0x0000
11:742 0:000 ========= Auto patch DSDT Starting ========
11:742 0:000 VideoCard devID=0x68BE1002
11:742 0:000 DisplayADR1[0] = 0x10000, DisplayADR2[0] = 0x0
11:743 0:000 USBADR[0] = 0x1A0000 and PCIe = 0xFFFE
11:743 0:000 USBADR[1] = 0x1C0006 and PCIe = 0x0
11:743 0:000 USBADR[2] = 0x1C0007 and PCIe = 0x0
11:743 0:000 USBADR[3] = 0x1C0007 and PCIe = 0x0
11:743 0:000 USBADR[4] = 0x1D0000 and PCIe = 0xFFFE
11:743 0:000
within the score:
11:743 0:000 Found PCIROOTUID = 0
11:743 0:000 ========= Auto patch DSDT Finished ========
11:743 0:000 Patch table: SSDT PROC
11:743 0:000 SSDT len = 0x1D6
11:743 0:000 Drop tables from Xsdt, SIGN=XXXX TableID= Length=0
11:743 0:000 Xsdt has tables count=6
11:743 0:000 corrected XSDT length=84
11:743 0:000 Inserting table[0]:SSDT.aml from EFI\CLOVER\ACPI\patched ... Success
11:745 0:001 CPUBase=0 and ApicCPUBase=1 ApicCPUNum=8
11:745 0:000 EdidDiscovered size=128
11:745 0:000 00 | 00 FF FF FF FF FF FF 00 22 F0 6E 28 01 01 01 01
11:745 0:000 16 | 22 14 01 03 80 40 28 78 EA 8D 85 AD 4F 35 B1 25
11:745 0:000 32 | 0E 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
11:745 0:000 48 | 01 01 01 01 01 01 E2 68 00 A0 A0 40 2E 60 30 20
11:745 0:000 64 | 36 00 81 90 21 00 00 1A BC 1B 00 A0 50 20 17 30
11:745 0:000 80 | 30 20 36 00 81 90 21 00 00 1A 00 00 00 FC 00 48
11:745 0:000 96 | 50 20 5A 52 33 30 77 0A 20 20 20 20 00 00 00 FF
11:745 0:000 112 | 00 43 4E 34 30 33 34 30 52 37 58 0A 20 20 00 57
11:745 0:000 Framebuffer @0xC0000000 MMIO @0xFE620000 I/O Port @0x0000E000 ROM Addr @0xFE600000
11:745 0:000 ATI card POSTed,
11:745 0:000 Set VRAM for Cedar=1024Mb
11:745 0:000 ATI: get_vram_size returned 0x40000000
11:745 0:000 ATI ROM not found
11:745 0:000 reading VBIOS from legacy space
11:746 0:000 ATI Radeon EVERGREEN family
11:746 0:000 Users config name Vervet
11:746 0:000 use N ports setting from config.plist: 3
11:746 0:000 (AtiPorts) Nr of ports set to: 3
11:747 0:001 ATI Juniper ATI Radeon HD 5750 Series 1024MB (Vervet) [1002:68BE] (subsys [174B:E138]):: PcieRoot(0x0)\Pci(0x1,0x0)\Pci(0x0,0x0)
11:747 0:000 HDA Controller [8086:1C20] :: PcieRoot(0x0)\Pci(0x1B,0x0) => detected codec: 10EC:0892
11:748 0:000 LAN Controller [10EC:8168] :: PcieRoot(0x0)\Pci(0x1C,0x7)\Pci(0x0,0x0)\Pci(0x8,0x0)\Pci(0x0,0x0)
11:748 0:000 RCBA access disabled; trying to enable
11:748 0:000 stringlength = 130446
11:754 0:005 CurrentMode: Width=2560 Height=1600
11:754 0:000 Beginning FSInjection
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: BDE38D18
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: BDE38D18
11:755 0:001 MSR 0x1B0 set to 00000000
11:755 0:000 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
11:755 0:000 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.10
11:755 0:000 Extra kext: EFI\CLOVER\kexts\10.10\FakeSMC.kext
11:757 0:001 Extra kext: EFI\CLOVER\kexts\10.10\RealtekRTL8111.kext
11:761 0:004 Extra kext: EFI\CLOVER\kexts\10.10\realtekALC.kext
11:764 0:002 Removed efi-boot-device-data variable: Not Found
11:764 0:000 Custom boot is disabled
11:764 0:000 Closing log