- Joined
- Mar 8, 2017
- Messages
- 7
- Motherboard
- Gigabyte LGA1151 Intel Z170 Micro ATX DDR4 Gaming 5 Motherboards (GA-Z170MX)
- CPU
- Intel BX80662I76700K 4512 Core i7 6700K 4.00 GHz Unlocked Quad Core
- Graphics
- N/A
Hello, below is my current build... how much power do I need to run this stuff?
I don't want too little, but I also don't want too much overkill as well...
cpu: Intel Core i7 6700K 4.00 GHz Unlocked Quad Core Skylake Desktop Processor, Socket LGA 1151
https://www.amazon.com/gp/product/B012M8LXQW/?tag=tonymacx86com-20
mob: Gigabyte LGA1151 Intel Z170 Micro ATX DDR4 Gaming 5
https://www.amazon.com/gp/product/B014SL2XKQ/?tag=tonymacx86com-20
ram (x2): Ballistix Sport LT 32GB Kit (16GBx2) DDR4
https://www.amazon.com/gp/product/B01AG9EZ6E/?tag=tonymacx86com-20
case: Fractal Design Node 804 MicroATX case
https://www.amazon.com/gp/product/B00K6OVG0I/?tag=tonymacx86com-20
HDs: Toshiba X300 6TB Desktop 3.5 Inch SATA 6Gb/s 7200rpm
https://www.amazon.com/gp/product/B013JPLKJC/?tag=tonymacx86com-20
(I'll be running (6) 6TB drives AND (2) SSDs)
I plan to run this as a big Plex server, with OSX as my OS of choice.
It should be noted I'm only going to run a graphics card during the setup/installation of OSX, then it will be removed as I'll be running a headless system from there.
Any advice is greatly appreciated! Thanks in advance.
I don't want too little, but I also don't want too much overkill as well...
cpu: Intel Core i7 6700K 4.00 GHz Unlocked Quad Core Skylake Desktop Processor, Socket LGA 1151
https://www.amazon.com/gp/product/B012M8LXQW/?tag=tonymacx86com-20
mob: Gigabyte LGA1151 Intel Z170 Micro ATX DDR4 Gaming 5
https://www.amazon.com/gp/product/B014SL2XKQ/?tag=tonymacx86com-20
ram (x2): Ballistix Sport LT 32GB Kit (16GBx2) DDR4
https://www.amazon.com/gp/product/B01AG9EZ6E/?tag=tonymacx86com-20
case: Fractal Design Node 804 MicroATX case
https://www.amazon.com/gp/product/B00K6OVG0I/?tag=tonymacx86com-20
HDs: Toshiba X300 6TB Desktop 3.5 Inch SATA 6Gb/s 7200rpm
https://www.amazon.com/gp/product/B013JPLKJC/?tag=tonymacx86com-20
(I'll be running (6) 6TB drives AND (2) SSDs)
I plan to run this as a big Plex server, with OSX as my OS of choice.
It should be noted I'm only going to run a graphics card during the setup/installation of OSX, then it will be removed as I'll be running a headless system from there.
Any advice is greatly appreciated! Thanks in advance.