My son is a Software major at University, and he was able to get a friend in Hardware to look at the PSU. It has power all over the board, but for some reason is not outputting power. He believes that there could be an issue in one of the micro controllers.
He suggested, with the new PSU, that I drain all of the capacitors with a resistor (I believe this is the correct terminology that he used) prior to performing any modifications to the PSU. He also noted that I make sure, that when I shorten the wires that I am not going to be using, I need to cut them and terminate them individually. I honestly cannot remember if I cuT them individually originally.
Hopefully with this information and procedure, I have better success with the new PSU