Are you using one of the EFI folders from this thread? If not, you need to post yours or else we'll have no clue how you have it setup.
yes im use same folders in thread but also when im use this folders i cant use both mac with windows 10
What Wifi /Bluetooth are you trying to use? If it's the one built in, then you won't be able to as Intel Wifi is not supported. Because of this most of us are using add on cards in a PCIe slot and have the built in Bluetooth disabled.
If you look at my first post I have explained why. OSX has a 15 port limit. I only have a couple of USB3 ports that also have 2.0 enabled. In order to get more than 15 ports you have to apply patches that change with each update. That is just irritating. I'd rather just set up the ports how I use them and call it a day. If you don't use the front USB-C port (which uses 3 of the 15 slots...) or 3.0/2.0 ports, you can modify your USB setup to enable 2.0 on more 3.0 ports.
I got you. Check the new upload. It has all ports working with 12 and 14 blocked (although 14 still shows in Hackintool for some reason). If you want 12 and/or 14, then look in the base EFI folder for USBPorts-All.kext. Remove whatever ports you don't want and rename to USBPorts.kext. Replace the one in the kexts folder and you should be good to go.
Honestly, if you have your BIOS setup as mine in the first post and are on the latest Bios, I don't know what else to tell you. Your profile says you are running a GeForce video card, so your setup isn't exactly like ours. The differences in your system may be preventing your system from sleeping. Also, did you unlock your MSR?
If you don't know, then it is locked. Unlock it using the procedure I outlined in post #63
