Contribute
Register

Problems with SSD and NVME in Mojave disks 10.14.4 Aorus Z390 Board

Status
Not open for further replies.
Joined
Dec 28, 2013
Messages
134
Motherboard
Z390 I AORUS PRO WIFI
CPU
i7-8700
Graphics
RX 580
Mac
  1. iMac
  2. MacBook Pro
Mobile Phone
  1. iOS
Hello, from update the system of Mojave 10.14.3 to 10.14.4 note a slowdown at the start, delay when starting, it does not bother me much but I noticed the change.

My query is not particularly so, but because every so often approximately every 30min-130min or when I move several files, the machine hangs for 10-15 seconds, I can move the mouse pointer, the arrow does not appear but as it is loading (the cursor is a ball of colors that turns), even stops the music too, it is annoying sometimes, with High Sierra I did not have this problem (but High Sierra had it installed in a Crucial SSD 250 not in the Nvme)
399056

My internal disks are:
  • 250GB SSD Nvme Samsung 970 Evo m2 (with Mojave Installed) - APFS
  • 480GB SSD Kingston A400 Sata (data with Mojave home folder) - APFS
  • 1TB SSD WD Blue m2 (only data) - APFS
  • 250gb Crucial MX500 Sata (Windows Installed) - NTFS
My Hackintosh:
  • Intel i7 8700
  • MB Z390 I Aorus Pro Wifi
  • Rx 580 Shappire
  • 24Gb Ram 2400Mhz (1x8gb 2400Mhz - 1x16gb 3000Mhz)
399054


399055



When I open the applications after starting, sometimes they delay in starting, after the system is on they start fast, before that did not happen.

I was looking at several issues, where there would be a similar problem, but I did not find one exactly.

In the console there is something that repeats a lot

399052


399053


I was thinking that it could be because of the TRIM since it was not enabled in the ssds, in the NVME if it was by default. Activate it with the option in clover. I do not change anything everything follows

399057



Then I thought it could be the SATA controllers, since the 1tb SSD of Western Digital Blue, and the 480GB kingston A400 (where I have the Mojave home folder) may not be supported by Mac. I have AHCI mode configured in BIOS, as you can see in the previous image I see "Generic AHCI Controller" I do not know if it will be fine or it should appear "Intel Series 300 ... etc" I honestly do not know.

I saw that in Multibeast there are some kexts for Sata
AHCI_3rdParty_eSATA-v0.5.kext
AHCI_3rdParty_SATA-v0.6.kext
AHCI_Intel_Generic_SATA-v0.5.kext

I also saw a kext of @RehabMan in hack-tools (Gith)
SATA-unsupported.kext

I have not tried the previous kext, I just wanted to be sure before doing it.

Another thing I'm thinking about trying is to replace the home folder in the NVme SSD and disconnect the other ssds, to see if the color ball returns to appear

In clover I have the following, in drivers64UEFI I think that I should eliminate EmuVariable because I already configure Imessage and it works well, for which I think it is no longer necessary.

Drivers64UEFI folder
399060


Kexts folder
399059


I know that the explanation was very long, but if there is someone who can help me solve this, it would be great.

I will be attentive to the messages. Thank you
 
Last edited:
Joined
Feb 23, 2017
Messages
274
Motherboard
MSI H97 GAMING 3
CPU
i5-4690
Graphics
HD 4600 & GTX 650 Ti
Mobile Phone
  1. iOS
I was thinking that it could be because of the TRIM since it was not enabled in the ssds, in the NVME if it was by default. Activate it with the option in clover. I do not change anything everything follows

Then I thought it could be the SATA controllers, since the 1tb SSD of Western Digital Blue, and the 480GB kingston A400 (where I have the Mojave home folder) may not be supported by Mac. I have AHCI mode configured in BIOS, as you can see in the previous image I see "Generic AHCI Controller" I do not know if it will be fine or it should appear "Intel Series 300 ... etc" I honestly do not know.

I saw that in Multibeast there are some kexts for Sata
AHCI_3rdParty_eSATA-v0.5.kext
AHCI_3rdParty_SATA-v0.6.kext
AHCI_Intel_Generic_SATA-v0.5.kext

I also saw a kext of @RehabMan in hack-tools (Gith)
SATA-unsupported.kext
Hi, how did you enable TRIM in Clover?

And have you tried any AHCI and SATA kexts? If so, slow SSD issue fixed?
 
Joined
Sep 25, 2012
Messages
528
Motherboard
Asus ROG STRIX Z390-F
CPU
i5-9600K
Graphics
RX 580
Mac
  1. iMac
Mobile Phone
  1. iOS
Status
Not open for further replies.
Top