Problems Installing High Sierra GA-Z87x-UD3H HELP!!!

[rav3lo]

Hello community,

Ive been busting my head for the past 3 days trying to install High Sierra on my already running Mavericks Build.
My Current Specs are:
-GA-z87x-ud3h
-On Board Graphics HD4600
-i5 4670k Processor
-16gb ram
-BIOS version F10
(Running HDMI to monitor)

BIOS SETTINGS:
- xHCI Mode: AUTO
- xHCI Hand-OFF: Enabled
- EHCI Hand-OFF: Enabled
- Internal Virtualization Technology: Disabled
- Init Display First: IGFX
- Wake on LAN: Disabled

I followed the basic Unibeast High Sierra Intallation, did the whole process. Formatted thumbdrive, installed high sierra via UEFI Mode and didnt pick any graphics option (no nvidia or inject) and successfully created the Unibeast Drive.

After that, i read on a few other posts to edit the config.plist to turn off nv_disable=1 so i did that.

The issue im running into is that i boot the computer from Unibeast, i reach the clover boot screen, choose my High Sierra drive, then i reach the Apple screen with a loading bar.... the bar loads all the way to the end and then the Apple logo switches to an error image.

All Help Is Welcome!!

 

[P1LGRIM]

- Internal Graphics: Disabled
- Init Display First: IGFX

Huh ?

 

[rav3lo]

Huh ?

Those are the settings on my BIOS

 

[P1LGRIM]

Those are the settings on my BIOS

A tad contradictory I feel.

 

[rav3lo]

A tad contradictory I feel.

I got the BIOS settings from this thread https://www.tonymacx86.com/threads/...70k-ga-z87x-ud3h-32gb-ram-gtx-770-4gb.246533/

Im a bit ignorant in this, im not fully aware of what im doing right and wrong. If you can point our the errors in my settings, ill be highly greatful for that!

 

[P1LGRIM]

I got the BIOS settings from this thread https://www.tonymacx86.com/threads/...70k-ga-z87x-ud3h-32gb-ram-gtx-770-4gb.246533/

That guide says :

- Internal Graphics: Disabled
- Init Display First, change it to the PCIe slot that you placed your graphics card in

Probably PEG or PCI.

 

[rav3lo]

I noticed that, but i do not have a grpahics card, im using onboard graphics, wouldnt that be IGFX?

 

[P1LGRIM]

I noticed that, but i do not have a grpahics card, im using onboard graphics, wouldnt that be IGFX?

Then why on Earth would you disable them in the BIOS settings ?

Internal Graphics: Disabled

 

[P1LGRIM]

then the Apple logo switches to an error image

Boot in verbose mode and post a picture of the "error image".

 

[CuriousMac]

I noticed that, but i do not have a grpahics card, im using onboard graphics, wouldnt that be IGFX?

You do realise that you disabled your iGPU ?

I think everything might be working, simply enable your Intel Graphics and you should be all set...

like @P1LGRIM said, post a verbose image with the "error".

Curious/\/\ac