- Joined
- Sep 6, 2012
- Messages
- 31
- Motherboard
- z77x-up5th
- CPU
- i7-3770k
- Graphics
- GT 640
- Mac
- Classic Mac
- Mobile Phone
Hello community,
Ive been busting my head for the past 3 days trying to install High Sierra on my already running Mavericks Build.
My Current Specs are:
-GA-z87x-ud3h
-On Board Graphics HD4600
-i5 4670k Processor
-16gb ram
-BIOS version F10
(Running HDMI to monitor)
BIOS SETTINGS:
- xHCI Mode: AUTO
- xHCI Hand-OFF: Enabled
- EHCI Hand-OFF: Enabled
- Internal Virtualization Technology: Disabled
- Init Display First: IGFX
- Wake on LAN: Disabled
I followed the basic Unibeast High Sierra Intallation, did the whole process. Formatted thumbdrive, installed high sierra via UEFI Mode and didnt pick any graphics option (no nvidia or inject) and successfully created the Unibeast Drive.
After that, i read on a few other posts to edit the config.plist to turn off nv_disable=1 so i did that.
The issue im running into is that i boot the computer from Unibeast, i reach the clover boot screen, choose my High Sierra drive, then i reach the Apple screen with a loading bar.... the bar loads all the way to the end and then the Apple logo switches to an error image.
All Help Is Welcome!!
Ive been busting my head for the past 3 days trying to install High Sierra on my already running Mavericks Build.
My Current Specs are:
-GA-z87x-ud3h
-On Board Graphics HD4600
-i5 4670k Processor
-16gb ram
-BIOS version F10
(Running HDMI to monitor)
BIOS SETTINGS:
- xHCI Mode: AUTO
- xHCI Hand-OFF: Enabled
- EHCI Hand-OFF: Enabled
- Internal Virtualization Technology: Disabled
- Init Display First: IGFX
- Wake on LAN: Disabled
I followed the basic Unibeast High Sierra Intallation, did the whole process. Formatted thumbdrive, installed high sierra via UEFI Mode and didnt pick any graphics option (no nvidia or inject) and successfully created the Unibeast Drive.
After that, i read on a few other posts to edit the config.plist to turn off nv_disable=1 so i did that.
The issue im running into is that i boot the computer from Unibeast, i reach the clover boot screen, choose my High Sierra drive, then i reach the Apple screen with a loading bar.... the bar loads all the way to the end and then the Apple logo switches to an error image.
All Help Is Welcome!!
Last edited: