- Joined
- Aug 2, 2021
- Messages
- 6
- Motherboard
- GA-Z77P-D3
- CPU
- i5-3570k
- Graphics
- GTX 1050 Ti
Hello guys!!!
I followed this guide for installation:
But I'm having problems and I don't know how to solve them
I am unable to boot without the pen drive on my hardware.
I've already tried to copy the EFI folder from the pen drive and I wasn't successful.
I've already tried the command:
I tried to configure the boot by Clover Configurator and it didn't work either.
I tried to put it in Legacy, but things got worse. I can't even boot.
And I also have a problem with the Nvidia driver.
Can someone help me, I've read several guides and tutorials right here, but there's always something different, whether it's an alternative tool, old or missing some information, thus generating more questions.
Off:
Before, I had installed Catalina and then High Sierra through the open core install guide, it worked correctly using the onboard card (intel HD4000) but the offboard(GTX 1050ti) no.
From what I researched UniBeast, MultiBeast + Clover Configurator, have more configuration options. But it's complicated to configure everything.
I followed this guide for installation:
UniBeast: Install macOS High Sierra on Any Supported Intel-based PC
UniBeast will now create the bootable USB drive. The process will only take about 10 minutes, depending on system and drive speed. Do not unplug or stop during this time. 15. Drag MultiBeast to your completed USB drive. Clover Note: UniBeast delivers basic bootloader support based on our...
www.tonymacx86.com
But I'm having problems and I don't know how to solve them
I am unable to boot without the pen drive on my hardware.
I've already tried to copy the EFI folder from the pen drive and I wasn't successful.
High Sierra is installed but won't boot without USB
i5-8400 z370 itx/ac I went through and made my USB with unibeast and got High Sierra installed on my internal SSD. It will not boot without the USB stick as it will just load the apple logo and just reboot. Strange things are happening as well including my boot selector in the bios screen is...
www.tonymacx86.com
I've already tried the command:
fs0:
cd efi
cd clover
bcfg boot add 0 cloverx64.efi "Clover"
[Solved] Extra boot option entires
I was curious about what BIOS version I have and then I clicked on the peripherals tab... and my jaw dropped.. WHAT THE HECK!? I have 81 boot options all pointing to the same 2 drives every time I boot I get new partitions... Please somebody explain what to do with this monstrosity? how do I...
www.tonymacx86.com
I tried to configure the boot by Clover Configurator and it didn't work either.
[Solved] Can't boot Sierra without USB
Aah i know the problem! Its an asus board. I have a asus p8p67 le. The trick that did it for me is use clover as legacy described somewhere here on the forum. Then go back to clover configurator and load the config.plist from the internal hdd. Then browse the tabs on the left there should be...
www.tonymacx86.com
I tried to put it in Legacy, but things got worse. I can't even boot.
[Solved] High Sierra won't boot without USB
Hello, After several days of trying to figure out the many problems I've had with installing High Sierra, I've now come to the last problem of my Hackintosh, and this is a problem I've been postponing. My Hackintosh won't boot without the UniBeast usb-stick. I've tried to Mount EFI(from both...
www.tonymacx86.com
And I also have a problem with the Nvidia driver.
Can someone help me, I've read several guides and tutorials right here, but there's always something different, whether it's an alternative tool, old or missing some information, thus generating more questions.
Off:
Before, I had installed Catalina and then High Sierra through the open core install guide, it worked correctly using the onboard card (intel HD4000) but the offboard(GTX 1050ti) no.
From what I researched UniBeast, MultiBeast + Clover Configurator, have more configuration options. But it's complicated to configure everything.