Contribute
Register

Problem with Intel HD3000 GE=Yes & disabled optimus GT640M

Status
Not open for further replies.
Joined
May 2, 2012
Messages
59
Motherboard
DC3217IYE
CPU
i3-3217U
Graphics
Intel HD4000
Hello,

i have a problem with booting my NB/SB i5/Intel HD3000 with
GraphicsEnabler=Yes (Chimaera 1.10).

It stucks at the beginning of the boot where the graphic device is initialised
and the nvidia device is still listed there (named OK but 0MB VRAM)
(no intelhd3000 listed).

My notebook has a additional nv optimus attached GT640M
which i disabled via DSDT edit (i think so ;) --> after edit only Intel HD3000 in System Profiler when booting with GE=No)

Anyone has a hint for me?

thanks in advance.
 
You said is disabled on the DSDT. Did you try disabling it on the BIOS?

Hope it helps.
 
Thanks for your reply. Sadly i have no option to set the graphic devive in BIOS (it's very restricted)
And i dont like to use a custom bios (if there is any / didnt search)

qe worked at 10.7.0 oob with ge=no
Transparent bar and all that stuff :)

So i tried some kext from osx86.net to get
Qe working without ge=yes. But no success
(modified the info.plist with my device id 0x0116 before install)

My system is running at 10.7.2 with
Native resolution and detected hd3000 +
Disabled nvidia card but no qe for the hd3000 :(

Is it possible to enable qe with ge=no at 10.7.2?
Shall i try to copy the kext from 10.7.0 ?

System definition is macbook pro 8,2

Regards Withoutaface
 
(SOLVED) Problem with Intel HD3000 GE=Yes & ...

finally, i got it !

My Laptop (Timeline Ultra M3 i5 Gt640)
has a "Series 7"-Mobile Chipset.

So after days, i found that post
viewtopic.php?f=15&t=61821

and used Dreamwatcher's AppleIntelSNBGraphicsFBInjector.kext

works awesome at 10.7.3 with GE=No and MacBookPro 8,1.plist
 
does this mean that you have nvidia and intel runnin? or just the 3000 series. i am about to buy this maschine and i dont know what version to buy. i dont need nvidia gfx if it´s not supported. and it would be VERY cool, if you can do a very short list of what is needed to get this machine running tight. i had a lot of hackintoshes and i still have a MBair to do stuff. so only necessary steps would be cool.
 
Status
Not open for further replies.
Back
Top