**I'm edition this post to not clutter the forum** **I will update this thread with pictures of my progress as it goes along I'm almost ready to to build my Hackintosh in the case What I have (material) 1x 2004 G5 case with a bump on the top (stripped out by me) 1x 2005 G5 case with no scratches ( stripped out by me) 1x 2Usb3 to 21 pin cable a fully functioning Hackintosh To do : -Buy a filter to put up front of the G5 Probably something like that http://www.ebay.ca/itm/232087868274?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2648 -Lime down the firewire port to be able to fit the usb3 cable -Get a blu ray drive to replace the old superdrive ? ( not a priority) -Get sound dampening material ? -Assemble the lot ! The Hack: My mackintosh has been running fine for about 6 months now. my part list is as follow Gigabyte Z170xp-sli ( bios f6) intel i7 6700k 32gb G.Skill ripsaw 2400 240mm Iao from arctic cooling 4tb+3tb hdd from seagate 120gb ssd from samsung Evga 770 sc from evga Broadcom BCM94360CD Dual Band 1300Mbps 802.11AC PCI-E WiFi Bluetooth 4.0 Adapter noctua nf-p12 x2 noctua nf-p12 pwm x2 Every function works as intended, but I'm gonna buy an ssd soon so I can dual boot windows. I'll probably use the opportunity to upgrade my bios and reinstall Sierra because at this moment, my clover is a bit of a mess with like 6 .config files.