Power Management Problem!

[RehabMan]

@RehabMan HYG!
A little reminder of my problem, my laptop won't shutdown properly as the power button light stay on after shutdown!, also battery stay stuck at 1% while charging and mac os shows "Power source: battery" even after removing battery!. and sleep is not working. Knowing that i had no problem with any of these before and everything was working fine, it just happened and i don't even know why!

Your kextcache shows errors that need to be fixed.
And your ACPI patching looks like it needs to be redone.
USB configuration not done.
GenericUSBXHCI.kext not recommended.
Android File Transfer can cause issues.
So can SoundFlower.
Look at the FAQ for guides/info.

 

[ahmednabilkha]

Your kextcache shows errors that need to be fixed.
And your ACPI patching looks like it needs to be redone.
USB configuration not done.
GenericUSBXHCI.kext not recommended.
Android File Transfer can cause issues.
So can SoundFlower.
Look at the FAQ for guides/info.

@RehabMan thank you for your time.
The kextcache error is about "Luli.Kext", i installed it only in clover, should i install it with "AppleBacklightFixup.kext" in L/E ?
Why do you think that i have to redone my ACPI patching? what should i exactly do?
What about my USB configuration? i already patched it in my DSDT?

 

[RehabMan]

@RehabMan thank you for your time.
The kextcache error is about "Luli.Kext", i installed it only in clover, should i install it with "AppleBacklightFixup.kext" in L/E ?
Why do you think that i have to redone my ACPI patching? what should i exactly do?
What about my USB configuration? i already patched it in my DSDT?

Refer to the FAQ for guides:

[FAQ] READ FIRST! Laptop Frequent Questions

Before asking a question, many common questions are already commonly asked and answered, and many answers exist in the sticky threads in this forum. Read this post before and any relevant guide before asking a question... If you ask a question that is answered by this FAQ, you'll likely be...

www.tonymacx86.com

 

[ahmednabilkha]

Refer to the FAQ for guides:

[FAQ] READ FIRST! Laptop Frequent Questions

Before asking a question, many common questions are already commonly asked and answered, and many answers exist in the sticky threads in this forum. Read this post before and any relevant guide before asking a question... If you ask a question that is answered by this FAQ, you'll likely be...

www.tonymacx86.com

@RehabMan I get it. I only have two questions,
Should i install "Lilu.Kext" with "AppleBacklightFixup.kext" in both L/E and EFI or just EFI ?
and Why do you think that i have to redone my ACPI patching?

 

[RehabMan]

@RehabMan I get it. I only have two questions,
Should i install "Lilu.Kext" with "AppleBacklightFixup.kext" in both L/E and EFI or just EFI ?
and Why do you think that i have to redone my ACPI patching?

All kexts you need must be installed to the system volume.
Read post #2 of the Clover guide for details:

[Guide] Booting the OS X installer on LAPTOPS with Clover

Overview One of the first challenges you'll face in installing OS X to your laptop will involve getting the OS X installer to boot from USB. This guide is for those wishing to use Clover (and in fact the only bootloader supported here). Both installing using Clover UEFI and Clover legacy are...

www.tonymacx86.com

And from my previous look at your files, it seems you did not follow the ACPI patching guide (linked from the FAQ).

 

[ahmednabilkha]

All kexts you need must be installed to the system volume.
Read post #2 of the Clover guide for details:

[Guide] Booting the OS X installer on LAPTOPS with Clover

Overview One of the first challenges you'll face in installing OS X to your laptop will involve getting the OS X installer to boot from USB. This guide is for those wishing to use Clover (and in fact the only bootloader supported here). Both installing using Clover UEFI and Clover legacy are...

www.tonymacx86.com

And from my previous look at your files, it seems you did not follow the ACPI patching guide (linked from the FAQ).

I see. Should i install it to L/E or S/L/E ?
and i followed the ACPI patching guide and my DSDT & SSDT are working fine.

 

[RehabMan]

I see. Should i install it to L/E or S/L/E ?

Read the FAQ. It answers your question.

and i followed the ACPI patching guide and my DSDT & SSDT are working fine.

Must attach new PR files after any change.

 

[ahmednabilkha]

Read the FAQ. It answers your question.



Must attach new PR files after any change.

HYG!

 

[RehabMan]

HYG!

Why do you have patched system kexts such as AppleIntelHD3000Graphics.kext?
Restore to vanilla by running the macOS installer.

 

[ahmednabilkha]

Why do you have patched system kexts such as AppleIntelHD3000Graphics.kext?
Restore to vanilla by running the macOS installer.

I edited it to only increase vram, i still have vanilla kext anyway