Contribute
Register

Post Your MultiBeast Config Files Here (.mb)

This is an oldie (LGA 1366) but a goodie (Geekbench: 18,611). Just updated to 10.9.5 on a new MX100 SSD. Note: The SSD needed the boot0 fix in order to be assigned the boot drive.

Specs:
Xeon X5650 @ 4.2 Ghz
Gigabyte X58A-UD3-r v2, firmware FH
12 GB (6 x 2) Corsair RAM
XFX 5770 single-slot
27-inch Apple Cinema Displayx
MX100 256 GB (primary boot)
G.Skill 64 GB (backup boot)
1TB Samsung (500 GB partition for third backup, 500GB partition for Windows 7 64-bit)
2 TB (2 X 1 TB Samsung) software RAID
3 TB photo drive

MB Settings:

Quick Start > UserDSDT - /Users/[USER]/Desktop/DSDT-GA-X58A-UD3R-2.0-FH.aml Drivers > Audio > Realtek ALCxxx > ALC889
Drivers > Disk > 3rd Party SATA
Drivers > Misc > FakeSMC v6.9.1315
Drivers > Misc > FakeSMC v6.9.1315 Plugins
Drivers > Misc > FakeSMC v6.9.1315 HWMonitor Application
Drivers > Misc > USB 3.0 - Universal
Drivers > Network > Realtek > RealtekRTL81xx v0.0.90
Drivers > System > AppleRTC Patch for CMOS Reset
Bootloaders > Chimera v3.0.1
Customize > Boot Options > Basic Boot Options
Customize > Boot Options > Generate CPU States
Customize > Boot Options > Use KernelCache
Customize > Boot Options > 1080p Display Mode
Customize > System Definitions > Mac Pro > Mac Pro 5,1
Customize > Themes > tonymacx86 Black

Did you use any of the following:
GraphicsEnabler=Yes
ATI Config: vervet
hibernate mode - desktop ATI

I have the same MB and Graphics as you(double slot) but I cant boot except in safe mode. I'm thinking of buying a new video card that works out of the box.

Tony.
 
Here's my Config for my GA-Z87X-UD3H
Screen Shot 2014-10-18 at 6.54.55 AM.png
 
I did not save the file .mb created during installation. How do I find the setup and post it.
I mavericks 10.9.5 installed and everything works (with the exception of not having a FaceTime webcam I can not test it)
 
Justr, could you send me some links for an overclocking guide to the X5650? or is it the same as an i7 930?

Thanks,
Tony.

This is an oldie (LGA 1366) but a goodie (Geekbench: 18,611). Just updated to 10.9.5 on a new MX100 SSD. Note: The SSD needed the boot0 fix in order to be assigned the boot drive.

Specs:
Xeon X5650 @ 4.2 Ghz
Gigabyte X58A-UD3-r v2, firmware FH
12 GB (6 x 2) Corsair RAM
XFX 5770 single-slot
27-inch Apple Cinema Displayx
MX100 256 GB (primary boot)
G.Skill 64 GB (backup boot)
1TB Samsung (500 GB partition for third backup, 500GB partition for Windows 7 64-bit)
2 TB (2 X 1 TB Samsung) software RAID
3 TB photo drive

MB Settings:

Quick Start > UserDSDT - /Users/[USER]/Desktop/DSDT-GA-X58A-UD3R-2.0-FH.aml Drivers > Audio > Realtek ALCxxx > ALC889
Drivers > Disk > 3rd Party SATA
Drivers > Misc > FakeSMC v6.9.1315
Drivers > Misc > FakeSMC v6.9.1315 Plugins
Drivers > Misc > FakeSMC v6.9.1315 HWMonitor Application
Drivers > Misc > USB 3.0 - Universal
Drivers > Network > Realtek > RealtekRTL81xx v0.0.90
Drivers > System > AppleRTC Patch for CMOS Reset
Bootloaders > Chimera v3.0.1
Customize > Boot Options > Basic Boot Options
Customize > Boot Options > Generate CPU States
Customize > Boot Options > Use KernelCache
Customize > Boot Options > 1080p Display Mode
Customize > System Definitions > Mac Pro > Mac Pro 5,1
Customize > Themes > tonymacx86 Black
 
Back
Top