Post Installation Problem GA-Z97X-UD3H

[dnlx]

Hey Guys,

maybe you could help me with that. Sometimes when I start my Computer I just get a Kernel Panic. It's not happening on every boot. I don't know how to fix it. I unplugged already everything on my USB Ports, but there's no difference.

https://www.dropbox.com/s/ao19moxo0avul1g/Foto 29.11.14 13 43 24.jpg?dl=0 (normal boot, with usb stick plugged in and external Hard Drive)

booted with -v to get some more informations. https://www.dropbox.com/s/uxzdgrmyycnpca7/Foto 29.11.14 16 26 10.jpg?dl=0 (unplugged everything I don't need)

Thank for helping Guys, I posted in the wrong Forum earlier.

 

[dnlx]

My Sound is working fine. So what should I do?

 

[dnlx]

if you can disable drop box temporarily, if using chameleon with /extra folder use the bootplist and smbios plist attached here.post back.View attachment 116113View attachment 116114


remove usb 3 kext from multibeast and look for rehab man generic usb kext and install.

Disable Dropbox? Dropbox isn't installed on this Mac. Yes I'm using Chameleon. Could you tell me how i get into the folder again? I can google it myself. But it's easier for me if you tell it to me

Remove USB 3 kext from Multibeast? How (sorry, it's my first hackintosh) "And look for rehab man generic usb kext"? Sorry

/Edit: I replaced both plist

 

[dnlx]

did you install usb3 kext with multibeast??? if yes go to /system/library/extensions/ and look for usb3 kext and delete.
before doing above operation, search with google for rehabman generic usb.kext, down load it.do you have kextbeast?? if not do a google search and download kextbeast too.use kext beast to install rehabman..usb.kext. in kext beast you have maintenance tab tick all and rebuild caches. in my post above you have blue coloured links for two files , download it and put it in your /extra folder.
keep your fingers crossed and reboot.

okay after I did this my mac didn't start I reinstalled my settings with multibeast and it's working like I said in the first post. I need like 2 Minutes to start

 

[gnommak]

I don't know what you install with multibeast, but you need only 3 drivers and bootloader for Z97 board on OS X 10.10.1 (or maybe 4 if you use SSD).
1. AppleIntelE1000e v3.1.0
2. ALC1150
3. FakeSMC
4. TRIM Enabler (optional, only for SSD)
If you install any other drivers (without knowing what you doing) you may have stability issues.
Here:
http://cl.ly/image/231g0y0Q1o02
I think it will be enough.

 

[dnlx]

I don't know what you install with multibeast, but you need only 3 drivers and bootloader for Z97 board on OS X 10.10.1 (or maybe 4 if you use SSD).
1. AppleIntelE1000e v3.1.0
2. ALC1150
3. FakeSMC
4. TRIM Enabler (optional, only for SSD)
If you install any other drivers (without knowing what you doing) you may have stability issues.
Here:
http://cl.ly/image/231g0y0Q1o02
I think it will be enough.

Hey, thanks for helping me! at least trying to.

I installed this with Multibeast. https://www.dropbox.com/s/aud5tg54px... 10.png?dl=0

 

[dnlx]

well I made a clean install now, is it normal that I need like 1 Minute to boot?