<< Solved >> [Please Help] AMD Radeon R7 370 Series Display 7MB

[takeru]

Hello everyone, I just installed High Sierra 10.13.6 a few days ago. Everything is fine except my graphics, it displays 7MB and no acceleration thus the screen is laggy.
I have used fake ID '0x68111002' and added it into AMD7000Controller.kext + AMDRadeonX4000.kext + AMDRadeonX4000HWService.kext.
I have been looking and trying every solutions that might solve this problem, however it solves none, Display 7MB still persists until now.
Please help me, I don't know what to do anymore, and feels hopeless now.

[Problem Attachments] P.S. I have attached my CPU + GPU info + config.plist + display 7MB problem with MacOS version

 

[takeru]

[Solved] I got it work by myself, my problem has been solved.
(It did work on Mojave 10.14.4 as well and will test on Catalina tomorrow)

Thank you for only viewing my thread anyway.

 

[takeru]

Catalina 10.15.6

 

[apik46]

[Solved] I got it work by myself, my problem has been solved.
(It did work on Mojave 10.14.4 as well and will test on Catalina tomorrow)

Thank you for only viewing my thread anyway.

share please how you fix it

 

[irvinstone]

Catalina 10.15.6

Hi, wow how you did it?
I probed everything:
-clover fakeid: 0x68101002, Framebuffer : Futomaki
-patched kext: added 0x68111002

• AMD7000Controller.kext
• AMDRadeonX4000.kext
• AMDRadeonX4000HWServices.kext

-opencore ssdt faking id

Alway giving me same result: black screen and blinks at the end of boot
used HDMI and dpi same.

Some help would be nice!!

 

[ewilson620]

Do you know how you fixed it. I am having the same issue
I have HP Workstation 2x Xeon 5650 48GB Ram with Radeon R7 370
I can get all the way in Setup it shows my Graphics card 7mb
I am Following his post but he has RX 580 When I copy his Kexts over I get the Black Screen Almost done Progress Bar when Rebooting.

HP Z600 10.14.6 install guide (PS2 keyboard and mouse not required)

As a long-time lurker and Hackintosher, this forum has been an incredible resource for me so after completing my latest project, a HP Z600 I decided to give back a little and make a guide for anyone else having trouble with this machine, as I sure know I did. Hardware Requirments: An...

www.tonymacx86.com

 

[raychau]

Do you know how you fixed it. I am having the same issue
I have HP Workstation 2x Xeon 5650 48GB Ram with Radeon R7 370
I can get all the way in Setup it shows my Graphics card 7mb
I am Following his post but he has RX 580 When I copy his Kexts over I get the Black Screen Almost done Progress Bar when Rebooting.

HP Z600 10.14.6 install guide (PS2 keyboard and mouse not required)

As a long-time lurker and Hackintosher, this forum has been an incredible resource for me so after completing my latest project, a HP Z600 I decided to give back a little and make a guide for anyone else having trouble with this machine, as I sure know I did. Hardware Requirments: An...

www.tonymacx86.com

1：go to [System/Library/Extensions ]copy
AMD7000Controller.kext
AMDRadeonX4000.kext
AMDRadeonX4000HWServices.kext

2：Edit AMD7000Controller.kext /contents/info.plist
IOPCIMatch
0x68101002(or 0x67981002 ) >>>0x66111002(your display id)

3：Edit AMDRadeonX4000.kext /contents/info.plist
AMDPitcairnGraphicsAccelerator
0x68101002(or 0x67981002 ) >>>0x66111002


4：Edit AMDRadeonX4000HWServices.kext/contents/info.plist
IOPCIMatch
0x68101002(or 0x67981002 ) >>>0x66111002

5：put in /Library/Extensions
AMD7000Controller.kext
AMDRadeonX4000.kext
AMDRadeonX4000HWServices.kext

6：config.plis
FixDisplay true
AddDTGP true
FakeID 0x68101002(or 0x67981002 )
Graphics
false all
iMac18.1

7：sudo kextcache -i /
8：reboot

 

[ewilson620]

1：go to [System/Library/Extensions ]copy
AMD7000Controller.kext
AMDRadeonX4000.kext
AMDRadeonX4000HWServices.kext

2：Edit AMD7000Controller.kext /contents/info.plist
IOPCIMatch
0x68101002(or 0x67981002 ) >>>0x66111002(your display id)

3：Edit AMDRadeonX4000.kext /contents/info.plist
AMDPitcairnGraphicsAccelerator
0x68101002(or 0x67981002 ) >>>0x66111002


4：Edit AMDRadeonX4000HWServices.kext/contents/info.plist
IOPCIMatch
0x68101002(or 0x67981002 ) >>>0x66111002

5：put in /Library/Extensions
AMD7000Controller.kext
AMDRadeonX4000.kext
AMDRadeonX4000HWServices.kext

6：config.plis
FixDisplay true
AddDTGP true
FakeID 0x68101002(or 0x67981002 )
Graphics
false all
iMac18.1

7：sudo kextcache -i /
8：reboot

Thank You so much for helping me. This Work I was able to get into MoJave. It booted right in and I have full GraphicsAcceleration. However I have few glitches maybe you can help me iron out.

The only port that works is HDMI. I am getting sound out through it my sound is working. Problem I having when I use DVI both are Showing Black screen. However they both will read when I check Display in about Mac Showing both Monitor hooked up only one displaying picture HDMI. The Displayport shows White Screen. So the only one that works is HDMI.
What can I do to get all Ports working on Card?

Also On my HP Workstation Z600 everything is working except USB 2.0 port. How can I get this working without deleting that AppleHPET.Kext? With this AppleHPET.Kext the computer runs quiet smooth sleep works wakes works just like Real Mac 5,1.

If I can get All Ports on Graphics Card working and USB 2.0 Ports working Then everything on this HP Z600 will be working under MoJave. My internal Sound card is working it shows Front Mic, Front Headphone Jack, Rear Line in Rear Output Rear Mic. Hear sound and everything.

 

[raychau]

Thank You so much for helping me. This Work I was able to get into MoJave. It booted right in and I have full GraphicsAcceleration. However I have few glitches maybe you can help me iron out.

The only port that works is HDMI. I am getting sound out through it my sound is working. Problem I having when I use DVI both are Showing Black screen. However they both will read when I check Display in about Mac Showing both Monitor hooked up only one displaying picture HDMI. The Displayport shows White Screen. So the only one that works is HDMI.
What can I do to get all Ports working on Card?

Also On my HP Workstation Z600 everything is working except USB 2.0 port. How can I get this working without deleting that AppleHPET.Kext? With this AppleHPET.Kext the computer runs quiet smooth sleep works wakes works just like Real Mac 5,1.

If I can get All Ports on Graphics Card working and USB 2.0 Ports working Then everything on this HP Z600 will be working under MoJave. My internal Sound card is working it shows Front Mic, Front Headphone Jack, Rear Line in Rear Output Rear Mic. Hear sound and everything.

sorry Bro.
I just finished that test
so share for U,
I am a new ^.^

 

[ewilson620]

sorry Bro.
I just finished that test
so share for U,
I am a new ^.^

Thanks Bro, I understand. Me too I haven't worked Hackintosh in a long time. If I can get this USB 2.0 working I will live with the HDMI one monitor as this HPZ600 is running along side my MacPro 3,1 with Catalina on it. For Photo editing and Video Editing.