- Joined
- Apr 29, 2017
- Messages
- 23
- Motherboard
- Gigabyte Z390 Aorus Pro WiFi
- CPU
- i9-9900K
- Graphics
- RX 580
- Mac
- Mobile Phone
edit: this was caused by a dodgy BT card; no longer required.
My hack currently wakes from sleep as soon as going to sleep. When viewing
To fix this I want to apply a patch to have the
My current DSDT (cut down) includes:
I've tried creating the following patch:
but it does not change the system DSDT. What am I doing wrong here?
My hack currently wakes from sleep as soon as going to sleep. When viewing
pmset -g log
the wake reason is "XDCI CNVW". Sidenote: I think this is the onboard CNVI WiFi/BT module?To fix this I want to apply a patch to have the
_SB.PCI0.CNVW._PRW
method return (GPRW (0x6D, Zero))
. I've tried one that applies to all _PRW
methods, but that stops me waking via keyboard/mouse.My current DSDT (cut down) includes:
Code:
DefinitionBlock ("", "DSDT", 2, "ALASKA", "A M I", 0x01072009)
{
Scope (_SB.PCI0)
{
Device (CNVW)
{
Name (_ADR, 0x00140003) // _ADR: Address
OperationRegion (CWAR, PCI_Config, Zero, 0x0100)
Field (CWAR, WordAcc, NoLock, Preserve)
{
VDID, 32,
, 1,
WMSE, 1,
WBME, 1,
Offset (0x10),
WBR0, 64,
Offset (0x44),
, 28,
WFLR, 1,
Offset (0x48),
, 15,
WIFR, 1,
Offset (0xCC),
WPMS, 32
}
Method (_S0W, 0, NotSerialized) // _S0W: S0 Device Wake State
{
Return (0x03)
}
Method (_PRW, 0, NotSerialized) // _PRW: Power Resources for Wake
{
Return (GPRW (0x6D, 0x04))
}
Method (_DSW, 3, NotSerialized) // _DSW: Device Sleep Wake
{
}
PowerResource (WRST, 0x05, 0x0000)
{
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (One)
}
Method (_ON, 0, NotSerialized) // _ON_: Power On
{
}
Method (_OFF, 0, NotSerialized) // _OFF: Power Off
{
}
Method (_RST, 0, NotSerialized) // _RST: Device Reset
{
If ((WFLR == One))
{
WBR0 = Zero
WPMS = Zero
WBME = Zero
WMSE = Zero
WIFR = One
}
}
}
Name (_PRR, Package (0x01) // _PRR: Power Resource for Reset
{
WRST
})
}
}
}
I've tried creating the following patch:
Code:
DefinitionBlock ("", "SSDT", 2, "hack", "CNVW", 0x00000000)
{
External(_SB.PCI0.CNVW, DeviceObj)
External(GPRW, MethodObj)
Scope (_SB.PCI0.CNVW)
{
Method (_PRW, 0, NotSerialized) // _PRW: Power Resources for Wake
{
Return (GPRW (0x6D, Zero))
}
}
}
but it does not change the system DSDT. What am I doing wrong here?
Last edited: