- Joined
- Dec 22, 2017
- Messages
- 79
- Motherboard
- Gigabyte Z390 Designare
- CPU
- i7-8086 Delidded
- Graphics
- Radeon VII
- Mac
- Mobile Phone
Ahh..I hear you have to tread carefully when delidding an i9-9900k?
I delidded and used cryonaut liquid metal . I have an ek velocity cpu block, and 2 Alphacool Nexus radiators . A 360 and a 280mm . Liquid is surging via a D5 with Bitspower Mod top, pump kit with a 250ml res up on top.
Prime 95 for 47 minutes. Lexmark, Real bench and HW monitor for cpu stressing.
I should have went with a z390 master or Extreme for OC'ing my 8086.
I feel that the Asrock Z370 Tai chi may have been a bottleneck for the 8086. I'm mostly in it for content creation so I chose the designare.
However with a good overclocking board and with Ram timings tightened right up, I have no doubt I can hit 5.6 ghz on liquid Pastrychef
I delidded and used cryonaut liquid metal . I have an ek velocity cpu block, and 2 Alphacool Nexus radiators . A 360 and a 280mm . Liquid is surging via a D5 with Bitspower Mod top, pump kit with a 250ml res up on top.
Prime 95 for 47 minutes. Lexmark, Real bench and HW monitor for cpu stressing.
I should have went with a z390 master or Extreme for OC'ing my 8086.
I feel that the Asrock Z370 Tai chi may have been a bottleneck for the 8086. I'm mostly in it for content creation so I chose the designare.
However with a good overclocking board and with Ram timings tightened right up, I have no doubt I can hit 5.6 ghz on liquid Pastrychef