- Jan 25, 2020
- Asus Z370-F
- RX 6600
- Mobile Phone
It's not work.this is screenshot.stuck here
I can't use Hackintool to fix usb,beacuse the keyboard and mouse don't work.oh my godDownload the EFI from post #1.
Use Hackintool to fix your USB.
Take the USBPorts.kext that Hackintool creates and put it in /EFI/OC/kexts/.
Copy the entire EFI Folder and put it in the EFI partition of your main system drive.
OBSERVATIONS AND PROBLEMS:
I.) Running with the opencore bootloader, I can’t access the BIOS screen at boot via holding down f2 or “delete.” Holding down either key, I just get a black screen that eventually yields the OC boot choices. If I disconnect all drives (no SATA devices) and boot with f2 or “delete” then the BIOS screen appears as you would expect and changes can be made and saved. This is not a deal-breaker but when I check online it seems a known bug and others online have noted it and freaked out. I tried adjusting the BIOS to a longer POST time (5 seconds) but this had no effect. Also, I then removed the 1 TB Opencore drive and tried booting with one of my older 250GB/Clover/Mojave drives and also failed to get into BIOS via f2 or “delete.” Strange! So I am not sure whether this problem arose with OC or what. Seems odd, and is possibly connected to my next SATA problem:
II.) If I boot from the 1TB / OC / Catalina drive with any other SATA drives attached to the system that are older (i.e. a 250GB/Clover/Mojave drive) then Opencore boot loader comes up and "sees" these other drives at the startup OC boot selector screen but after boot into OSX they are no longer visible. I tried to find and mount these drives with diskutil and diskutility, but nothing is available to mount. Even if I connect one externally via a USB port it is not mounting. I am wondering what I need to change to fix this and have drives mount? Is the problem that these drives have EFI partitions with Clover in them? Or a general SATA issue?
III.) I think some people have managed a dual-boot system where if they have 2 drives in a system and one has OC bootloader and one has Clover bootloader they can boot from either. I am not sure how I would set that up because as of this moment to me it looks like there is not great compatibility and if you have 2 different bootloaders on different drives they have to fight for the GUI??
Any advice or ideas appreciated. I could post my clover config.plist and my opencore config.plist if that would help.