Contribute
Register

pastrychef's $62 Dell OptiPlex 3050 Clunker - i3-6100 - RX 560

Status
Not open for further replies.
Yes. I can see it. It stopped with graphics error.

Please try with this config.plist.

I used your latest EFI with the config.plist you gave me and the update has started.
Now I let it end and try to see how it goes.

I update you.
thanks a lot
 
I used your latest EFI with the config.plist you gave me and the update has started.
Now I let it end and try to see how it goes.

I update you.
thanks a lot

The installation is complete, but upon rebooting from the mac os partition it restarts and the usual image of errorre apple comes out.

Watch the video yourself

Now he doesn't even start with the Catalina installation USB stick anymore, he always left from there.
 

Attachments

  • VID_20200414_163711.mp4.zip
    45.5 MB · Views: 113
The installation is complete, but upon rebooting from the mac os partition it restarts and the usual image of errorre apple comes out.

Watch the video yourself

Now he doesn't even start with the Catalina installation USB stick anymore, he always left from there.

Please try using the EFI r4 on post #1 with the config.plist from post #100.
 
Please try using the EFI r4 on post #1 with the config.plist from post #100.

Done, but stop at the apple logo.

I send you the photo of the verbose mode
 

Attachments

  • IMG_20200414_172252.jpg
    6.9 MB · Views: 53

Attachments

  • EFI.zip
    36.6 MB · Views: 176
Please try this.

Perfect.
Now it's gone

Just to understand, now what was the problem, so maybe I'll learn something.

After I go to see the differences between the two EFI.

For the moment it seems to be working

Now I work a little bit on it and let's see how it goes.
 
Perfect.
Now it's gone

Just to understand, now what was the problem, so maybe I'll learn something.

After I go to see the differences between the two EFI.

For the moment it seems to be working

Now I work a little bit on it and let's see how it goes.

When it was stopping at the row of plus signs (++++++++++++++), that was an Aptio fix error. I changed to a different version of AptioMemoryFix to get around this.

When it was stopping with the kernel panic due to graphics error, I reapplied the DVMT prealloc fix to your config.plist. I don't think you changed the DVMT prealloc in Grub shell correctly.

Your final error was fixed by updating Clover.
 
When it was stopping at the row of plus signs (++++++++++++++), that was an Aptio fix error. I changed to a different version of AptioMemoryFix to get around this.

When it was stopping with the kernel panic due to graphics error, I reapplied the DVMT prealloc fix to your config.plist. I don't think you changed the DVMT prealloc in Grub shell correctly.

Your final error was fixed by updating Clover.

Thanks so much for the explanation.
 
Hello!
My computer is also Dell OptiPlex 3050 sff
I downloaded your EFI before and cannot enter the APPLE installation interface
Could you please help me make an EFI according to the configuration of my computer?
The computer configuration is below:
CPU:i5-6500
RAM:Samsung 4GB*2 2133Mhz
ROM: NVME SSD 240Gb
Graphics card: AMD RX560 4GB
wifi&Bluetooth :BCM94360CD
Motherboard:DEll B250

Thank you!
 
Hello!
My computer is also Dell OptiPlex 3050 sff
I downloaded your EFI before and cannot enter the APPLE installation interface
Could you please help me make an EFI according to the configuration of my computer?
The computer configuration is below:
CPU:i5-6500
RAM:Samsung 4GB*2 2133Mhz
ROM: NVME SSD 240Gb
Graphics card: AMD RX560 4GB
wifi&Bluetooth :BCM94360CD
Motherboard:DEll B250

Thank you!

Please boot in verbose mode and post a picture of where it gets stuck.
 
Status
Not open for further replies.
Back
Top