- Joined
- Aug 20, 2016
- Messages
- 1
Hi everyone! It's the first time for me installing os x and would be nice to get some help with this error.
Trying to install the el capitán and all seems to be ok but during the loading with the apple screen I'm getting that panic cpu 0 error and the pc reboot after 3 seconds.
How can I fix that error?
Thanks in advance!!!
Notes:
The USB was created using that guide: http://www.tonymacx86.com/threads/u...pitan-on-any-supported-intel-based-pc.172672/
Motherboard: Gygabyte b85M-DS3H
RAM: 4GB DDR3
Processor: Intel Pentium G3258
Graphics: Integrated (Intel HD Graphics, Haswell)
Bios settings:
XHCI Hand-off: Enabled
EHCI Hand-off: Enabled
Execute Disable Bit: Enabled
XHCI Mode: Auto
Legacy USB Support: Enabled
Super IO Serial Port: Disabled
Trying to install the el capitán and all seems to be ok but during the loading with the apple screen I'm getting that panic cpu 0 error and the pc reboot after 3 seconds.
How can I fix that error?
Thanks in advance!!!
Notes:
The USB was created using that guide: http://www.tonymacx86.com/threads/u...pitan-on-any-supported-intel-based-pc.172672/
Motherboard: Gygabyte b85M-DS3H
RAM: 4GB DDR3
Processor: Intel Pentium G3258
Graphics: Integrated (Intel HD Graphics, Haswell)
Bios settings:
XHCI Hand-off: Enabled
EHCI Hand-off: Enabled
Execute Disable Bit: Enabled
XHCI Mode: Auto
Legacy USB Support: Enabled
Super IO Serial Port: Disabled