- Joined
- Jul 30, 2013
- Messages
- 105
- Motherboard
- ASUS ROG Maximus X Hero
- CPU
- I7-8700K
- Graphics
- GTX 1070 SC2
- Mac
I had delidded my cpu and used Thermal Grizzly Kryonaut Thermal Grease Paste when I relidded inside and outside for connecting to the cooler. The machine runs stable with cores fluctuating between 35ºc and 43ºc but when I try to render, especially in Cinema 4d, it starts to hit 80º and 90º.. which I assume is bad since overheating alarms are going off.
Followed this video for my overclock -
These are the bios settings from that overclock-
xmp -> enabled
Asus multicore enhancement -> Disabled
Ave instruction core ratio negative offset -> 3
cpu core ratio -> sync all cores
1- core ratio limit -> 50
Cpu svid support -> disabled
External digi+ power control
Cpu load-line calibration -> level 6
Internal cpu power management
Going duration package tower limit -> max 4095
Short duration package power limit -> max 4095
Cpu core/cache current limit max. -> max 255.50
Max cpu cache ratio -> 42
Max cpu cache ratio -> 42
Bulk aware adaptive voltage -> disabled
Cpu core / cache voltage -> 1.35
Followed this video for my overclock -
xmp -> enabled
Asus multicore enhancement -> Disabled
Ave instruction core ratio negative offset -> 3
cpu core ratio -> sync all cores
1- core ratio limit -> 50
Cpu svid support -> disabled
External digi+ power control
Cpu load-line calibration -> level 6
Internal cpu power management
Going duration package tower limit -> max 4095
Short duration package power limit -> max 4095
Cpu core/cache current limit max. -> max 255.50
Max cpu cache ratio -> 42
Max cpu cache ratio -> 42
Bulk aware adaptive voltage -> disabled
Cpu core / cache voltage -> 1.35
Last edited by a moderator: