OsxAptipFixDrv Error

[Antonis112]

After a long day i managed to have a nice setup of El Capitan on my Yoga 2 Pro
But App store was not working so i tried RehabMan https://github.com/RehabMan/OS-X-Null-Ethernet

And a video i saw on the internet stating that adding just a host entry to config.plist through clover configurator would do the trick

The result is a
OsxAptipFixDrv Error requested memory exceeds our allocated relocation block

I can boot from safe mode
I replaced the config.plist with the one i started with and was working
Clover and all kexts were downloaded today from the latest links.

Any suggestion?

Thank you

 

[RehabMan]

After a long day i managed to have a nice setup of El Capitan on my Yoga 2 Pro
But App store was not working so i tried RehabMan https://github.com/RehabMan/OS-X-Null-Ethernet

And a video i saw on the internet stating that adding just a host entry to config.plist through clover configurator would do the trick

The result is a
OsxAptipFixDrv Error requested memory exceeds our allocated relocation block

I can boot from safe mode
I replaced the config.plist with the one i started with and was working
Clover and all kexts were downloaded today from the latest links.

Any suggestion?

Thank you

Installation instructions are covered in the README: https://github.com/RehabMan/OS-X-Null-Ethernet

 

[Antonis112]

@RehabMan my issue now is that unless n safe mode the Mac will not start.

Since I overwrote config.plist the error has to in some of the kexts right?

I remember installing nullethernet with kexts wizard.

Is there any kind of startup repair utility that can help track down the issue?

Thank you

 

[iosmaher]

RehabMan , Can you help me with withs
i wanna disable Radeon 7650m on Prebook 4540s ivy-b
which choice i should choose

 

[Antonis112]

UPDATE (Im posting from my El Capitan):

After a lot of back and forth i got the error message away and booted normally.
Not sure what worked but i will post my steps taken:

1. Remove all references of NullEthernet and its Injector (Remove also from /S/L/E)
2. Replace config.plist with the one i started with
3. Replace contents of EFI/BOOT with the ones of an clover iso
4. Same for EFI/CLOVER/*.efi
5. Remove OsxAptioFixDrv and insert OsxAptioFix2Drv from
6. Boot from save mode and do a kext cache clean and rebuild
7. start booting with -f

Now that i finally got it back, is there any method to take a snapshot of my build that could be reformated on top if any other issue presents itself (including efi partition)?

 

[TpwUK]

UPDATE (Im posting from my El Capitan):

After a lot of back and forth i got the error message away and booted normally.
Not sure what worked but i will post my steps taken:

1. Remove all references of NullEthernet and its Injector (Remove also from /S/L/E)
2. Replace config.plist with the one i started with
3. Replace contents of EFI/BOOT with the ones of an clover iso
4. Same for EFI/CLOVER/*.efi
5. Remove OsxAptioFixDrv and insert OsxAptioFix2Drv from
6. Boot from save mode and do a kext cache clean and rebuild
7. start booting with -f

Now that i finally got it back, is there any method to take a snapshot of my build that could be reformated on top if any other issue presents itself (including efi partition)?

Carbon Copy Cloner will back-up everything so you can even boot from the copy if you need to. You can even clone to a USB stick, it takes a while but it works.

Martin

 

[the-braveknight]

Make sure you have RtVariables set as required.

 

[RehabMan]

@RehabMan my issue now is that unless n safe mode the Mac will not start.

Since I overwrote config.plist the error has to in some of the kexts right?

I remember installing nullethernet with kexts wizard.

Is there any kind of startup repair utility that can help track down the issue?

Thank you

Boot verbose, show photo. Attach EFI/Clover folder as ZIP (omit 'themes' folder).

 

[RehabMan]

RehabMan , Can you help me with withs
i wanna disable Radeon 7650m on Prebook 4540s ivy-b
which choice i should choose

It is already done if you follow the ProBook guide.

https://www.tonymacx86.com/threads/...book-using-clover-uefi-hotpatch-10-11.189416/

 

[RehabMan]

UPDATE (Im posting from my El Capitan):

After a lot of back and forth i got the error message away and booted normally.
Not sure what worked but i will post my steps taken:

1. Remove all references of NullEthernet and its Injector (Remove also from /S/L/E)
2. Replace config.plist with the one i started with
3. Replace contents of EFI/BOOT with the ones of an clover iso
4. Same for EFI/CLOVER/*.efi
5. Remove OsxAptioFixDrv and insert OsxAptioFix2Drv from
6. Boot from save mode and do a kext cache clean and rebuild
7. start booting with -f

Now that i finally got it back, is there any method to take a snapshot of my build that could be reformated on top if any other issue presents itself (including efi partition)?

EFI partition is just files/folders. You can make a copy of them with Finder.
Your system volume can be backed up with TimeMachine or an image made in Disk Utility.