OSX/Yosemite Compatible build?

[bnolan]

Hey all, I'm bnolan. I'm new to tonymacx86 and I just want to say thanks for all the support. I've been reading around and you guys are a great community, so it was only natural I joined.

Why I'm here
I'm in the tech industry, where I work as a web developer/UX designer and have been running with Macbook Pro's recently due to location, travel and portability. However, I used to build custom PC's and I recently wanted to take up the project of hackintoshs and really get into the niche community. I was just wondering if my parts are compatible with a Yosemite hackintosh build. Already built my computer, but have been too busy to really try and get os x on there until recently. Reading through a lot of guides, I've been a little confused and intimidated at using OSX. This build is primarily for a workstation home studio to do my professional video/graphic production with a little gaming on the side. (as to why I went with the CPU I got)

Questions I Have
1. Are my parts feasible?
2. Do I need to reformat my SSD into a mac suitable format or can I just leave it alll hooked up ready to go and Unibeast/Multibeast will do the rest.
3. Upon using Multibeast, does this copy OSX and all the driver files to the SSD, so I can boot normally without the USB drive?
4. Do I need internet hooked up to run multibeast? Currently, its in my home studio and I have no CAT6 or wireless adapter connected to my build, and I'm hoping multibeast would install all (or most) of the basic drivers to get it running, then I can go find the rest when I get internet hooked up


CPU: Intel Core i7-4930K 3.4GHz 6-Core Processor
CPU Cooler: Corsair H100i 77.0 CFM Liquid CPU Cooler
Motherboard: Gigabyte GA-X79-UP4 ATX LGA2011 Motherboard
Memory: Corsair Vengeance Pro 32GB (4 x 8GB) DDR3-1866 Memory
Storage: Samsung 840 EVO 250GB 2.5" Solid State Drive
Video Card: MSI GeForce GTX 770 2GB TWIN FROZR Video Card
Case: NZXT H440 (White/Black) ATX Mid Tower Case
Power Supply: Corsair 860W 80+ Platinum Certified Fully-Modular ATX Power Supply

PICTURE OF BUILD - mid installation of parts


Any help or info would be great. Thanks so much everyone.

PS - I've been looking into these specific guides, and I was assuming I was on the right track with these, any guidance again would be great.

http://www.tonymacx86.com/445-unibeast-install-os-x-yosemite-any-supported-intel-based-pc.html

http://www.tonymacx86.com/basics/104536-troubleshooting-issuing-boot-flags.html

http://www.tonymacx86.com/basics/104490-how-know-what-install-multibeast.html

 

[Solidww]

I think your parts should work well. There's a guide where someone lists exactly what their steps where to get OS X running on their machine.

Try using your motherboard model and search for guides. Good luck.