Contribute
Register

OSX has stopped booting

Status
Not open for further replies.
This EFI/Clover easily installed OSX before the BIOS update

I also installed in accordance with guaid.
The same effect. The same error
 
I also installed in accordance with guaid.
The same effect. The same error

You will need to provide files that show you actually followed the guide.
So far, the files you provide prove you did not.
 
I did it according to [Guide] Booting the OS X installer on LAPTOPS with Clover.

Unfortunately, there is still the same error. Installation stops in the same place: "End RandomSeed".

It does not matter what I set in config.plist.
The error is the same.

I'm attaching the new Clover
 

Attachments

  • CLOVER.zip
    2 MB · Views: 62
I did it according to [Guide] Booting the OS X installer on LAPTOPS with Clover.

Unfortunately, there is still the same error. Installation stops in the same place: "End RandomSeed".

It does not matter what I set in config.plist.
The error is the same.

I'm attaching the new Clover

Your config.plist is not from the guide.
And the guide recommends AptioMemoryFix.efi over OsxAptioFix*.efi.
For installation, you should not have patched ACPI. Remove all content from ACPI/patched.
Use the plist from the guide unmodified.
Keep in mind guide instructions for DVMT-prealloc and invalid ig-platform-id.
 
I changed AptioMemoryFix.efi, config.plist and ACPI.
Unfortunately, the same error.

The problem must be in a different place. Maybe Microsoft blocked something in the new BIOS.

I have no idea anymore.
 
attached version after amendment.
 

Attachments

  • 20180919_101346-01.jpeg
    20180919_101346-01.jpeg
    3.6 MB · Views: 60
  • CLOVER_v3.zip
    1.9 MB · Views: 137
attached version after amendment.

Is this using an USB2 stick?
Are you using invalid ig-platform-id? (you might as well set it in config.plist/Graphics/ig-platform-id since you're going to always need it for the installer).
Try also with cpus=1 (kernel flag).
 
Yes, I have a USB2 stick.
I also tried on USB3 stick and SSD.
Without a difference, the same error.

I set cpus=1 and I tried graphics fakeID and normal ID.
the same error
 
Status
Not open for further replies.
Back
Top