OS X 10.9.2 Update

[tonymacx86]

​

Today Apple released 10.9.2, the second major update to OS X Mavericks. Update any supported system using the built-in Software Update functionality through the Mac App Store, or by using the standalone installer available from Apple.com.

Download the OS X 10.9.2 Combo Update​

Be sure to back up any important data, and if possible clone your hard drive before applying the update. If you have any issues post-update, boot using UniBeast and type UseKernelCache=No.

​

What we know about 10.9.2 so far...

• OS X Build 13C64
• 13.1.0 Darwin kernel
• Security and stability patches, including fix for "gotofail" SSL exploit - screenshot
• Mac Pro 6,1 system definition and support files
• Initial Ivy Bridge E/EP CPU support
• Initial, but incomplete X79/C606 Chipset support
• Updated Intel, NVIDIA, and AMD graphics drivers
  • If you use patched or modified drivers, you will need to re-apply changes to the updated drivers.
• This update will replace your audio drivers.
  • You will have to reinstall AppleHDA using MultiBeast before or after reboot
  • If you use VoodooHDA, you will not need to make any modifications
• Storage drivers updated - TRIM patch will need to be reapplied before or after reboot.

​

Testing is now underway- this post will be updated. Good luck, and let us know how it goes! Report your results here.

Related Posts:
OS X 10.9.1 Update
OS X Mavericks is Now Available on the Mac App Store for Free
OS X 10.8.5 Supplemental Update
OS X 10.8.5 Update
OS X 10.8.4 Update
OS X 10.8.3 Update
OS X 10.8.2 Update
OS X 10.8.1 Update

 

[Stork]

Article: OS X 10.9.2 Update

Here's the step by step way to update:

Repair Permissions using the Disk Utility on the drive to be updated;*
Backup your current installation using Carbon Copy Cloner or SuperDuper;
Use the Software Update to download and install 10.9.2 (recommend using the Combo Update);
Re-boot;
Run MultiBeast for Mavericks and just select your audio driver to install and TRIM (if needed);
Re-boot; and
Repair Permissions again.*​

If you have TRIM enabled, check to see if it was affected by this update.


* You can use the Terminal instead of Disk Utility if you feel comfortable with a UNIX command:

sudo diskutil repairPermissions /

 

[relaxman]

There we go! Updating!

 

[reconalpha]

Curious about whether the updated drivers include support got Nvidia GeForce GTX 780 Ti ... will post when the update is complete and let you guys know.

 

[Craigrox]

Which cards will benefit from the nVidia graphics drivers update?

 

[kigger012]

Hope this works flawless~~~

 

[benbumben]

The link leads me to the [h=1]OS X Mavericks 10.9.1 Update for Mac Pro (Late 2013)[/h]
not 10.9.2

 

[kigger012]

hope this works flawless~!!!

 

[gaart]

Article: OS X 10.9.2 Update

Update in progress! Holding fingers crossed, maybe X79/C606 gets some support.

 

[ccmdav]

Tonymac, what is meant by "incomplete" X79/C606 support? As well as "initial" (if anything other than the obvious first attempt)?