OS X 10.9.2 Update

[EMunch]

Article: OS X 10.9.2 Update

I lost audio too , i'm new in hackintosh...what can i change in multi beast to have sound?

Just install audio from MultiBeast again

 

[BryanWatson]

Asus Maximus VI Gene
4770k
GTX 770

10.9.2 worked until restart. Seems like it changed the EFI partition, which made it so I couldn't boot into OSX once I shutdown. This is caveat of the VI Gene as it can't good from GUID partitions.

Resolved this by booting into my Mavericks USB, and then selecting the harddrive I have OSX installed on. The 10.9.2 update finished successfully and I was able to boot into OSX.

I had to reinstall the Audio and TRIM drivers with Multibeast:

Drivers > Audio > Realtek ALCxxx > Without DSDT > ALC1150
Drivers > Audio > Realtek ALCxxx > Without DSDT > HDAEnabler
Drivers > Disk > TRIM Enabler > 10.9.0 TRIM Patch

I also had to redo the Bootloader to EFI fix again to make the drive bootable. Here is the guide I followed:
http://www.tonymacx86.com/401-install-bootloader-extra-efi-partition.html

 

[dmpradas]

I need help!!!.....Anyone having camera issues or problems with Facetime or PhotoBoot...? I have the Logitech Webcam C210, and video doesn't work but microphone does...
Many people says that this update gives cameras iSight issues!!!!!, look at this carefully.... Is there any kext that we can change in Extensions from the 10.9.1 to make works???... Thank you for your possible answers...

 

[Miaouss]

Works great ! Just reactivate Trim enabler with multibeast. No issues with a gtx660

I7 GA-Z77X-UD5H GTX 660

 

[PJALM]

Article: OS X 10.9.2 Update

Asus Maximus VI Gene
4770k
GTX 770

10.9.2 worked until restart. Seems like it changed the EFI partition, which made it so I couldn't boot into OSX once I shutdown. This is caveat of the VI Gene as it can't good from GUID partitions.

Resolved this by booting into my Mavericks USB, and then selecting the harddrive I have OSX installed on. The 10.9.2 update finished successfully and I was able to boot into OSX.

I had to reinstall the Audio and TRIM drivers with Multibeast:

Drivers > Audio > Realtek ALCxxx > Without DSDT > ALC1150
Drivers > Audio > Realtek ALCxxx > Without DSDT > HDAEnabler
Drivers > Disk > TRIM Enabler > 10.9.0 TRIM Patch

I also had to redo the Bootloader to EFI fix again to make the drive bootable. Here is the guide I followed:
http://www.tonymacx86.com/401-install-bootloader-extra-efi-partition.html

I am using the same motherboard but I use GUID and Clover. I updated using Software Update not the combo update, let it reboot, and everything just worked

 

[Nopileus]

H87N-Wifi/i5-4570/HD7870

Repaired permissions
Updated from combo
Black screen after boot (on either GPU)
tried all combinations of -x -v graphicsenabler and igpenabler

10.9.2 Unibeast stick kernelpanics upon booting the installer.

Any ideas?

 

[tomh1992]

after rebooting and reinstalling TRIm and audio i get a kernel panic at boot :S i'm now trying to use unibeast to start multibeast and reinstall the dsdt free pack

 

[neophitus]

I got some trouble here.

I´ve used to got 3 monitors working fine on an ATI 5770 Vapor-X (2 DVI, 1 DP->DVI Active Adapter).
After the update, i cant boot with DP->DVI Adapter plugged in.

I Got stuck on "VM Swap Subsystem is ON" Message.

Any ideas?

 

[jameswuk]

Seems to have broken my Z87N-Wifi. Now stuck at the TonyMac Grey screen with apple.

How long should I give the spinning clock to load any updates before giving up?

UPDATE: Fixed this by setting GraphicsEnabler to YES (ie. opposite of 10.9.1). Also, see my post in General Help about setting PCIRootUID to 1 (this fixed my dual monitor setup)

 

[peshis]

Article: OS X 10.9.2 Update

Initially no sound, manually patched the new AppleHDA 2.6.0 for 898. (as of writing Multibeast is still packaged with 2.5.3 from 10.9.1) Everything works fine on GA-Z87X-UD3H.