Contribute
Register

OS X 10.9.2 Update

Status
Not open for further replies.
Joined
Nov 9, 2013
Messages
6
Mac
Classic Mac
Mobile Phone
Updated worked well using the instructions from the front page on GA-Z87X-D3H. I reinstalled the audio and trim as instructed. On my GeForce 770 4G the monitors flipped. What was monitor 1 became monitor 2 and vise versa. I swapped the cables and that problem was 'fixed' but very odd. In google chrome though, on either youtube or twitch video I only get a couple of seconds of audio then it cuts out. This only appears to be happening in chrome. I will reinstall that and see what happens. Other than that, good stuff.

I did also do the NVRam fix for iMessage and got that working. I may back that out as well.

Update:
Removed chrome from applications and Library, reinstalled and the problem is gone.
 
Joined
Aug 7, 2011
Messages
19
Motherboard
GA-Z97-Gaming 5
CPU
4790K
Graphics
1x Titan X & 1x GTX 770
Mac
  1. Mac mini
  2. Mac Pro
Classic Mac
Mobile Phone
  1. iOS
Article: OS X 10.9.2 Update

Count me as another one curious about how to use the new system definition. I'm on x79 (3930k) and would like to experiment with this new definition. I just don't know where to find it.
 
Joined
Feb 10, 2014
Messages
1
Motherboard
Z87N-WIFI
CPU
I5-4670K
Graphics
HD4600
Mac
  1. iMac
Gahh tried installing 10.9.2 with Z87N-WIFI motherboard but the monitor shuts off after attempting to boot…. ANY IDEAS??
 
Joined
Aug 27, 2013
Messages
9
Motherboard
GA-Z87X-OC
CPU
4670k
Graphics
GTX 770
Mac
  1. MacBook Pro
Classic Mac
Mobile Phone
  1. Android
  2. iOS
I'm stuck at the apple boot logo with the spinning wheel. So far I've only tried GraphicsEnabler yes and no and IGPEnabler=No. Have no clue as to what I'm doing or how to fix.
 
Joined
Apr 13, 2010
Messages
13
Motherboard
Hackintosh
CPU
i7-4770k
Graphics
EVGA GeForce 760
Mac
  1. MacBook Air
Classic Mac
Mobile Phone
  1. Android
Trouble-free upgrade using combo updater, ASUS Z87-PRO. Had to reapply TRIM patch as expected. I have two displays running off an NVIDIA 760 and their desktop arrangement was reversed after the reboot, but that was easily fixed.
 
Joined
Jul 4, 2012
Messages
368
Motherboard
Gigabyte Aorus Z390 Ultra
CPU
i5-9600K
Graphics
Vega 56
Mac
  1. iMac
  2. MacBook Pro
Mobile Phone
  1. iOS
Article: OS X 10.9.2 Update

Can you boot using the -v boot flag? You can press '-' when the boot loader appears, then enter what you want to use. Noticing what is loading when it hangs would help the forum help you.
 
Joined
Jul 25, 2012
Messages
55
Motherboard
Dell Precision T3500
CPU
Xeon 3503
Graphics
RX 560
Mobile Phone
  1. Android
Article: OS X 10.9.2 Update

KP on Optiplex 755 previously running 10.9.1 stably.

To install 10.9 on this system required substituting these kexts - IOPCIFamily.kext, IOAHCIFamily.kext, AppleAHCIPort.kext from 10.8.5 into the usb installer.

To boot from the new install required reinserting the Mavericks kexts IOPCIFamily.kext and IOAHCIFamily.kext
as per post #6 here.

Updated using AppStore (not Combo). Now KP with msg: Extensions in backtrace - com.apple.driver.AppleAHCIPort(3.0)... and the other 2 kexts above listed as dependencies.

Appreciate any assistance.

Dell Optiplex 755
CPU: 3GHz C2D
8GB RAM
Graphics Card VTX3D 1GB Radeon HD 5670 DDR3 PCI-E 2.1
 
Joined
Dec 23, 2013
Messages
42
Mac
Classic Mac
Mobile Phone
Article: OS X 10.9.2 Update

Here's the step by step way to update:
:ch: Repair Permissions using the Disk Utility on the drive to be updated;*
:ch: Backup your current installation using Carbon Copy Cloner or SuperDuper;
:ch: Use the Software Update to download and install 10.9.2 (recommend using the Combo Update);
:ch: Re-boot;
:ch: Run MultiBeast for Mavericks and just select your audio driver to install and TRIM (if needed);
:ch: Re-boot; and
:ch: Repair Permissions again.​

If you have TRIM enabled, check to see if it was affected by this update.


* You can use the Terminal instead of Disk Utility if you feel comfortable with a UNIX command:
Code:
sudo diskutil repairPermissions /

I have root installed on a software RAID 1. I had a kernel panic on the first re-boot. I plugged in the Unibeast USB, booted, selected "USB" and it booted from my RAID 1. Then, I ran Multibeast as suggested above and also this:

Code:
newfs_hfs -v EFI /dev/disk0s1
newfs_hfs -v EFI /dev/disk1s1
mkdir /Volumes/EFI
mkdir /Volumes/EFI2
mount_hfs /dev/disk0s1 /Volumes/EFI
mount_hfs /dev/disk1s1 /Volumes/EFI2
cd /Volumes/USB/usr/standalone/i386
fdisk -f boot0 -u -y /dev/rdisk0
fdisk -f boot0 -u -y /dev/rdisk1
dd if=boot1h of=/dev/rdisk0s1
dd if=boot1h of=/dev/rdisk1s1
cp boot /Volumes/EFI/
cp boot /Volumes/EFI2/
umount /Volumes/EFI/
umount /Volumes/EFI2/
fdisk -e /dev/rdisk0 <<EOF
p
f 1
w
y
quit
EOF
fdisk -e /dev/rdisk1 <<EOF
p
f 1
w
y
quit
EOF

Then, I continued with the instructions and the system was fine.
 
Joined
Jan 2, 2014
Messages
2
Motherboard
GA-Z87-D3HP
CPU
i5-4670k
Graphics
Intel 4600 integrated
Mac
  1. MacBook Pro
Classic Mac
Mobile Phone
  1. Android
All working here with one minor hiccup. Followed Stork's instructions from the first comment, and all seemed to be good until the last restart. Audio was working again, but no TRIM support on either of two Sandisk 128GB SSDs.

Re-reapplied TRIM patch only via MultiBeast, fixed permissions, then attempted to restart. Had to force restart using button on the front of my case when the system hung at the spinning icon. That seemed to do the trick, though, as I now have TRIM enabled and no further shutdown or restart errors.
 
Status
Not open for further replies.
Top