Contribute
Register

OS X 10.8.5 Update

Status
Not open for further replies.
Joined
Aug 17, 2012
Messages
475
Motherboard
GA-Z77X-UD5H
CPU
i5-3570K
Graphics
RX 570
Mac
  1. MacBook
Mobile Phone
  1. iOS
Z77X UD5H with I5-3570k / GTX 650 ASUS / 16 GB RAM / BT IOGEAR 4.0 / MAC Pro 3,1 / HDMI Audio (RT898) / iMessage / App Store

Update from 10.8.4 to 10.8.5 through APP Store. After the update I used MB 5.4.3 to install Audio again.

No issues, also USB works fine.
 
Joined
Sep 9, 2012
Messages
44
Motherboard
Asus Z97-A
CPU
Intel Celeron G1840
Graphics
EVGA GTX 750 Ti + Asus EX II Thunderbolt -> LG 34UM95
Mac
  1. iMac
Mobile Phone
  1. Android
  2. iOS
GA-Z77MX-D3H TH (rev. 1.0) F6b
Followed Stork's instructions, the only issue is the USB3 ports, they will only recognise USB3 pens/storage, after the update. Everything else is working fine.
 
Joined
Jan 12, 2012
Messages
162
Motherboard
GA-H77n-Wifi
CPU
i3-3225
Graphics
HD 4000
Mac
  1. MacBook Air
  2. MacBook Pro
Classic Mac
  1. Centris
  2. Power Mac
Mobile Phone
  1. iOS
It didn't work, but seemed to work?
Combo update installer said failed, blah blah blah...
Tried to repair permissions and got some strange error..."Error: Whole disk required but a slice was passed."
Reboot and about this mac says 10.8.5
Ran Multibeast for audio and trim. Rebooted.
Audio worked, about this mac says trim not enabled.
Repaired permissions worked this time.
Re-ran multibeast for trim, repair permissions, reboot.
Seems like everything is working now.

This is on my eHack i3 with GA-H77n-Wifi. I'll wait a week or so before doing the update on my main i5 hack.
 

Stork

Admin
Staff member
Joined
Sep 21, 2010
Messages
13,783
Motherboard
Asus ProArt Z490 Creator
CPU
i5-10400
Graphics
RX 580
Mac
  1. MacBook Pro
  2. Mac mini
  3. Mac Pro
Classic Mac
  1. Power Mac
  2. PowerBook
Mobile Phone
  1. iOS
Article: OS X 10.8.5 Update

GA-Z77MX-D3H TH (rev. 1.0) F6b
Followed Stork's instructions, the only issue is the USB3 ports, they will only recognise USB3 pens/storage, after the update. Everything else is working fine.
You'll need the updated (this afternoon) GenericUSBXHCI.kext for USB to work again. I've updated my Post #2.
 
Joined
Apr 6, 2013
Messages
42
Motherboard
Gigabyte GA-Z77X-UP5 TH
CPU
i7-3770K
Graphics
GTX 760
Mobile Phone
  1. iOS
I updated to 10.8.5 per Stork's instructions. Got the "installation failed" message for the install but nevertheless the update was installed. Also got installation failed for the Multibeast but the audio is working fine anyway. Don't see any USB issues (yet). The bluetooth works flaky but it was always that way.

Doing the permission repair after the installation I get this error message:

Warning: SUID file “System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconfig” has been modified and will not be repaired.
Warning: SUID file “System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner” has been modified and will not be repaired.
Warning: SUID file “usr/bin/ipcs” has been modified and will not be repaired.
Warning: SUID file “usr/bin/sudo” has been modified and will not be repaired.


What do these mean? What is a SUID file?

Thanks
David

i7 - 3770K
GA-Z77X- UP5-TH
660TI video card
 
Joined
Feb 1, 2011
Messages
38
Motherboard
Massive Quad
CPU
3770k
Graphics
GeForce 670
Mac
  1. iMac
  2. MacBook
  3. MacBook Air
  4. MacBook Pro
  5. Mac mini
  6. Mac Pro
Classic Mac
  1. Centris
  2. Color Classic
  3. iBook
  4. iMac
  5. Performa
  6. Plus
  7. Portable
  8. Power Mac
  9. PowerBook
  10. Quadra
  11. SE
  12. Xserve
Mobile Phone
  1. Android
  2. iOS
Article: OS X 10.8.5 Update

You'll need the updated (this afternoon) GenericUSBXHCI.kext for USB to work again. I've updated my Post #2.

Will that updated kext work for the UP4-TH as well? I seem to remember the 5 has a different chipset for the USB 3 ports than the 4.

Thanks.

-AC3
 
Joined
Jul 31, 2012
Messages
9
Motherboard
Asus P8Z77-V (Bios 1406 modded); 8gb @1866 MHz; OS X 10.8.3
CPU
i7 3770k @stock speed
Graphics
Asus HD 7870 2 gb
Mac
Classic Mac
Mobile Phone
  1. iOS
Article: OS X 10.8.5 Update

Used combo update, then installed chimera 2.2, then installed updated intel LAN and appleHDA kexts from multibeast. Rebooted and got KP which says "unknown CPU". image attached http://s18.postimg.org/uy1eb5ue1/image.jpg . Can boot into system only by typing -F flag. I suspect chimera caused this. If someone had the same issue, please let us know.
Asus P8z77-v (modded bios)
i7 3770k
ati 5770

BTW, geekbench score wend down to 14500 points from 15100 while on 10.8.4.

Ok, was able to boot the system without flags, but this time got spinning beach ball! Had to force restart, but got kernel panic again...
 

Attachments

  • image.jpg
    image.jpg
    1 MB · Views: 122
Joined
Nov 26, 2012
Messages
1
Motherboard
"Granny Smith"
CPU
Intel Core i5 3450
Graphics
Evga Nvidia Geforce Gtx 650 ti ssc
Mac
Classic Mac
Mobile Phone
My audio also isn't working, I have a gigabyte b75-d3v with 887. I tried reinstalling it multiple times with multibeast and rebooting, and it still doesn't work. Any ideas?
 
Joined
Aug 30, 2012
Messages
11
Motherboard
Gigabyte GA-Z77-DS3H
CPU
Intel Core i5-3570K
Graphics
Intel HD 4000
Mac
  1. MacBook Air
  2. MacBook Pro
  3. Mac mini
Mobile Phone
  1. iOS
Article: OS X 10.8.5 Update

Updated
I recommend the Combo update instead of the store incremental update. My procedure is to
  1. Repair Permissions using the Disk Utility on the drive to be updated;*
  2. Backup your current system with Time Machine or Carbon Copy Cloner or SuperDuper;
  3. If you're using the "USB 3 - Universal" (Zenith432's GenericUSBXHCI.kext), remove it from S/L/E folder**;
  4. Run the Combo Update - don't reboot yet;
  5. Run MultiBeast to reload only the audio driver;
  6. Download the GenericUSBXHCI.kext and install using Kext Utility;
  7. Reboot; and
  8. Repair Permissions again.*

NOTICE: Hawell owners are not having success with this update. Before trying to update, backup your 10.8.4 Haswell Helper system. If the update doesn't work, try a fresh install by
  • restoring your 10.8.4 Haswell Helper installation;
  • go to the MAS and download the Install Mountain Lion app (it's now 10.8.5), using Option-Click on the Purchase menu item;
  • prepare a UniBeast USB thumb drive with the updated UniBeast v2.1; and
  • making sure your backup is current, do a fresh install.
If this doesn't work, restore your 10.8.4 Haswell Helper installation and wait for updating news. Being an early adapter is hell sometimes. One user had success with a fresh install.


* You can use the Terminal instead of Disk Utility if you feel comfortable with a UNIX command:
Code:
sudo diskutil repairPermissions /

** Zenith432's GenericUSBXHCI.kext has been reported to cause Kernel Panels on some motherboards after the update.

Thanks to this now I can completely install the Combo Update without errors.
But the update still broke my USB 3.0 ports and my Targus mini bluetooth 2.0 adapter :(

My setup GA-Z77-DS3H - i5 3570K - HD 4000
 
Status
Not open for further replies.
Top